Bosch D7212GV2 Operation And Installation Manual page 47

D7212GV2 | Operation and Installation Guide | 11.0 Arming Devices
.
Momentary Contact
If the point to which the keyswitch is connected is programmed for a momentary contact, shorting the arming
circuit toggles the area's arming state between armed and disarmed. All faulted points are force armed, regardless
of the entry in the FA Bypass Max program item. Refer to Point Assignments in the D7212GV2 Program Entry Guide
(P/N: F01U003804).
Silencing the Bell
To silence the bell (stop Alarm Bell output) if the system is armed, position the keyswitch to disarm the area. If the
area is disarmed, turn the keyswitch once to start the arming process. Turning the keyswitch a second time stops
the arming process and silences the bell.
Bosch Security Systems, Inc. | 5/05 | F01U003805B 47