TP-Link tapo 7106509958 Quick Start Manual

Wire Your Switch
Turn off the circuit breaker. Then
1
remove the old wallplate of the wall
switch and label the wires.
Ground: Usually green or copper.
Neutral: Usually white, not connected to the dumb switch.
Line/Load: Usually black, and connected to the dumb
switch.
If you are unsure, consult a qualified electrician.
2
Disconnect wires from the old switch.
Connect the wires to the smart switch as
3
shown below.
Note: No need to distinguish between Line and Load wires.
Line up the switch with the mounting
4
holes. Secure it with screws.
Attach the wallplate and turn on the
5
circuit breaker. Then the wiring is finished.
Set Up Your Switch
DOWNLOAD APP
STEP 1
Get the Tapo app from the App Store or
Google Play.
OR
SET UP
STEP 2
Tap the button in the app. Select Switches
and then your model. Follow the step-by-step
app instructions to set up your smart switch.