Multitech RouteFinder RF825-C-Nx Reference Manual page 24

Step 4 – Save and Restart
Select the Save and Restart button located just under the menu bar. The Save and Restart
screen displays.
Save to Flash Memory
If a connection is established, then the settings have been entered correctly and your basic
configuration is now complete. Now, you must save your settings to the Flash Memory; this saves
the current settings in the flash prom and prevents settings from getting lost at the next power up.
Restart
This is optional. You do not have to restart the RouteFinder after saving to the flash memory.
Step 5 – Checking the Tunnel
To see if the tunnel is up you can click on Statistics & logs and go to the IPSec Live Log. You will
see the connection up; and if any data is being sent across, you will see that information here.
Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B)
Chapter 2 – Behind NAT Setup Examples
24