Specifications; Ethernet Port; 56K Dsu Port; Command Port - Multitech RouteFinder MTASR2-201 User Manual

Multi-tech routefinder mtasr2-201 routers: user guide
Hide thumbs Also See for RouteFinder MTASR2-201:
Table of Contents

Advertisement

Specifications

Routing Protocols - IP and IPX and Bridging all others
Protocols - Point-To-Point Protocol (PPP) and Serial Line Internet Protocol (SLIP)
Two 1 Meg by 32 byte, 70 nanosecond SIMMs (8 Mb DRAM, total)
Caution: SIMM speed and size cannot be mixed
One Meg of flash memory

Ethernet Port

Single Ethernet Interface - 10Base-T (twisted pair) RJ-45 jack

56K DSU Port

Single 56K bps DDS 4-wire RJ-45 jack

Command Port

Single 19.2 Kbps asynchronous Command Port using a short RJ-45 to DB-25 cable with
a DB-25 female connector

WAN Link

One 115200 bps async or T1/E1 (1.544/2.048 Mbps) sync link using a DB-25 (RS232/
V.35) female connector

Electrical/Physical

Voltage - 115 VAC (Standard), 240 Volts AC (Optional)
Frequency - 47 to 63 Hz
Power Consumption - 10 Watts
Dimensions -
Weight - 2 pounds (.92 kg)
MTASR2-201
1.625" high x 6" wide x 9" deep
5.63 cm high x 22.34 cm wide x 33.51 cm deep
Chapter 1 - Introduction and Description
11

Advertisement

Table of Contents
loading

Table of Contents