Multitech MultiModem MT5634ZBA-USB Quick Start Manual page 11

Using the Global Wizard to Configure Your Modem
1. Insert the MultiModem USB CD into the CD-ROM drive.
The Autorun dialog box appears.
2. Click Initial Setup and Country Selection. The Global
Wizard dialog box appears. Click Next.
3. The Global Wizard searches for your modem and
identifies it. Click Next.
4. Select the country in which the modem will be used and
then click Next.
5. Review your choice of country. If it is correct, click Next
to configure the modem.
6. When Global Wizard announces that the parameters
have been set, click Finish to exit.
Using AT Commands to Configure Your Modem
If you are comfortable using AT commands, you can use
them to configure your modem. You must enter these
commands in your communication program's terminal
window (a program such as Phone Tools). To use AT
Commands, see the User Guide for details.
Step 5: Install Data Communications Software
Data communications software is designed to send and
receive messages. Multi-Tech includes Phone Tools
communications software with your modem. However, the
modem will work with most data communications software.
To install Phone Tools, insert the CD into the CD-ROM drive;
click the Phone Tools icon. You will be asked to choose your
language. The software automatically loads onto your PC.
MT5634ZBA-USB Quick Start Guide
11