Table of Contents
Advertisement
F-NR200 5G Industrial CPE User Manual
Chapter 3 Configuration
3.1 Connection
Before configuring the 5G industrial CPE, you need to connect the 5G industrial CPE and the
PC used for configuration through the Ethernet cable or WIFI. When connecting with a Ethernet
cable, one end of the network cable is connected to any Ethernet port of the 5G industrial CPE
"Local Network" (hereinafter referred to as the LAN port), and the other end is connected to the
Ethernet port of the PC. When connecting with WIFI, the factory default SSID of 5G industrial
CPE is "FOUR-FAITH", no password verification is required.
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 16 of 76
Add: Floor 11,A06 building, No.370,Chengyi Street,Jimei District, Xiamen,China,361021.
Web:http://en.four-faith.com
Hotline:400-8838-199
Tel：0592-6300320
Fax：0592-5912735
Advertisement
Table of Contents
