Table of Contents
Advertisement
Chapter 3 Configuration and Management
This chapter describes how to configure and manage the router.
3.1 Configuration Connection
Before configuration, you should connect the router and your configuration PC with the supplied
network cable. Plug the cable's one end into the Local Network port of the router, and another end into
your configure PC's Ethernet port. The connection diagram is as following:
Please modify the IP address of PC as the same network segment address of the router, for instance,
192.168.1.9. Modify the mask code of PC as 255.255.255.0 and set the default gateway of PC as the
router's IP address (192.168.1.1).
3.2 Access the Configuration Web Page
The chapter is to present main functions of each page. Users visit page tool via web browser after
connect users' PC to the Router. There are eleven main pages: Setting, Wireless, Service, VPN, Security,
Access Restrictions, NAT, QoS Setting, Applications, Management and Status. Users enable to browse
slave pages by click one main page..
Users can open IE or other explorers and enter the Router's default IP address of 192.168.1.1 on
address bar, then press the bottom of Enter to visit page Web management tool of the Router. The users
login in the web page at the first name, there will display a page shows as blow to tip users to modify the
default user name and password of the Router. Users have to click "change password" to make it work if
they modify user name and password.
After access to the information main page
Email: allen@four-faith.com
Add: Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen, China
F-R200 User Manual--Industrial Router
Tel: +86-13828722770
Web: www.four-faith.hk
18
18 / 81
Advertisement
Table of Contents
