Management And Configuration; Set Up; Basic Setup - Four-Faith F-NR200 User Manual

F-NR200 5G Industrial CPE User Manual
You need you need to enter the corresponding user name and password if you click the main menu
for the first time.

3.3 Management and configuration

3.3.1 Set up

Click "Settings" to open the first page is the basic settings. Through this page, you can follow the
prompts to make changes to the basic settings, click the "Save Settings" button to make changes
but do not take effect, click the "Apply" button to make the changes take effect, or click the
"Cancel Changes" button to cancel change.

3.3.1.1 Basic setup

The "WAN connection type" setting section describes how to configure the 5G industrial CPE to
connect to the Internet. You can get detailed information about this from your ISP.
WAN Connection Type
Select the Internet connection type provided by your ISP from the drop-down menu. The WAN
connection type includes 6 methods: disabled, static IP, automatic DHCP, PPPOE,
3G/UMTS/4G/LTE, DHCP-4G/5G.
1.：disable
Prohibit the connection type setting of the WAN port
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 19 of 76
Add: Floor 11,A06 building, No.370,Chengyi Street,Jimei District, Xiamen,China,361021.
Web:http://en.four-faith.com Hotline:400-8838-199 Tel：0592-6300320 Fax：0592-5912735