Lenovo motorola DROID TURBO 2 Service And Repair Manual page 80

DROID TURBO 2 / Moto X Force
Level 2 – Service and Repair Manual
8. Place the PCB into the fixture.
9. Remove the PCB Adhesive from the carrier.
10. Place the PCB Adhesive into the fixture, using
the pins in the fixture to align it.
11. Press down on the PCB Adhesive for 5 seconds
to secure it to the PCB.
12. Remove the PCB from the fixture.
13. Remove the remaining liner from the PCB
Adhesive.
PAGE 80
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola