Lenovo motorola DROID TURBO 2 Service And Repair Manual page 127

DROID TURBO 2 / Moto X Force
Level 2 – Service and Repair Manual
7. Remove the adhesive liner from the Camera
Deco.
8. Place the Camera Deco on the Rear-Facing
Imager Bezel, aligning the Bezel Lens.
9. Press down on the Camera Deco for 5 seconds
to secure it to the Rear-Facing Imager Bezel.
10. Remove the Rear-Facing Imager Bezel adhesive
liner from the Rear Inlay.
11. Place the Rear-Facing Imager Bezel into
position on the Rear Inlay. Verify the Bezel Lens
is oriented toward the top of the Rear Inlay.
12. Press down on the Rear-Facing Imager Bezel
for 5 seconds to secure it to the Rear Inlay.
13. Use a cotton swab to apply 3M Adhesion
Promoter 111 to the Rear Housing in the
highlighted area.
PAGE 127
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola