DROID TURBO 2 / Moto X Force
Level 2 – Service and Repair Manual
1.
Place one end of the Coax Cable over the
connector on the PCB.
2.
Press down on the Coax Cable until it snaps in
place.
3.
Push the Coax Cable and small cable shield into
the guide on the PCB.
// CAUTION //
Make sure the Coax Cable is assembled with the
small cable shield inserted in the guide on the
PCB. If the Coax Cable is assembled as shown,
remove it and connect the opposite end of the
cable.
PAGE 96
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola