DROID TURBO 2 / Moto X Force
Level 2 – Service and Repair Manual
DROID Logo Removal
NOTE
After you remove the DROID Logo, you
cannot reuse it.
1.
Bend the bottom left corner of the Rear Inlay until
the left edge of the DROID Logo lifts from the
Rear Inlay.
2.
Slide the Thin Plastic Spudger under the left
edge of the DROID Logo. Slide the Spudger
towards the right edge of the Logo until it lifts
from the Rear Inlay.
PAGE 41
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola