Table of Contents
Advertisement
Selecting from list boxes
Configuring Rack Info In the rack Info screens, the following are the fields, and their possible contents:
RS.8D.M2.22
groups. Note that in the case of this particular field, entering a 0 (zero) will pop up a
warning box letting you know that a zero response here will eliminate the suction
groups already configured and will delete all information stored for the rack; you will
be asked to confirm the entry.
The next pair of illustrations shows how the controller uses list boxes.
The list box appears, as shown at left above, when you move the cursor to the field
and then press the +/- key (or, at your PC, right click). Then, using the UP and
DOWN arrow keys, you can move the cursor to make a selection. In the example at
right, R404A has been chosen. The cursor actually stayed in the same position, but
the "window" moved.
When you have put the list box's cursor on the selection you want, press ENTER to
save your selection.
Some list boxes contain only two choices (for example, Yes and No in the Monitor
phase loss field). Some may contain many choices. When that is the case, one of the
lines in the box will contain three dots. When the cursor is moved to the three dots,
additional choices appear.
Now that we understand navigation and making changes, we can go on to a discus-
sion of each of the configuration screens.
Rack label
2 stage system
No of suction groups
Refrig type
Oil type
Monitor phase loss
AK2-SC 255 Reference Manual
(Upper case letters, A to Z) The "name" of the rack.
(List box: Yes, No)
(0 to 5) Note that for a rack with existing configura-
tion, entering and confirming a 0 will cause deletion of
all existing rack information.
(List box) The kind of refrigerant.
(9 characters, not constrained)
(List box: Yes, No) Whether or not there will be a
15
Advertisement
Table of Contents
