JPT YDFLP-E-60-M7-M-R User Manual page 23

YDFLP-E-60-M7-M-R User Manual
3.1.3.2 Default parameter setting and selection
E type software can modify laser default parameter setting and selection in the option of
"Parameter setting" and "Parameter selection". The parameter settings take effect immediately
and save automatically after power down.
Figure 20 Default parameter settings and selection
Lock PRR: Laser will lock to GUI setting frequency.
Default pulse: The laser will use GUI default pulse when no pulse width control command
received.
Simmer：Can be used for controlling the height of the first pulse, the higher the value, the larger
the first pulse. Setting range: 0-1000
Simmer setting examples:
[Appropriate Simmer]
19 File Number: S-PI-0035