JPT YDFLP-E-60-M7-M-R User Manual page 2

Safety Information
Please read this manual carefully before operating the YDFLP fiber lasers.
In order to ensure the safe operation and optimal performance of the product, please
strictly follow the safety notification below.
Make sure that the 24V DC power supply is connected in the correct way. Inappropriate
●
connection might damage the product.
To prevent electrical shock, please do not remove the laser cover. Warranty will be
●
invalid if warranty label is removed.
Please wear appropriate laser safety goggle (see below Fig.1.) before emitting the laser.
●
We recommend OD4+ goggle or better. This laser module carries a Class 4 laser rating,
which emits invisible 1064nm wavelength laser radiation with average output power
over 60W and peak power over 10kW. Both direct beam and reflected beam will cause
permanent damage to the eyes, skin, and might cause fire.
Caution: Even at 0% power emitting, the average output laser power is still around
●
100mW.
Figure 1 Laser Safety Goggle
I
YDFLP-E-60-M7-M-R User Manual
File Number: S-PI-0035