Antifouling System Causes Interferences; The Mx Computer Does Not Power Off; Immediately; Giving Remote Access To The Computer - Marport M6 PRO User Manual

Hide thumbs Also See for M6 PRO:
Table of Contents

Advertisement

Antifouling system causes interferences

Sonihull™ Ultrasonic Antifouling System causes important noise interference. You can
see below an example of spectrum on a hydrophone when Sonihull™ system is off (1) and
when it is switched on (2).
You need to switch off Sonihull™ system while fishing.
The Mx computer does not power off immediately
When the Mx computer restarts after updating the receiver firmware, or after manually
restarting it from Manage Receiver page on Mosa2, the Mx computer can take up to 1
minute 30 to power off.
Press and hold the power button on the front of the Mx computer for 10 seconds to
power it off immediately.

Giving Remote Access to the Computer

If you have an issue with the system, you may need to give remote access to the
computer to the support team with TeamViewer application.
You need to have access to a good internet connection.
M6 PRO | V6 | Maintenance and Troubleshooting
41

Advertisement

Table of Contents
loading

Table of Contents