Configuring Mac Mini Network - Marport M6 PRO User Manual

Configuring Mac Mini Network

By default, the IP address of the Mx computer is 192.168.1.170. You need to change the
IP address of the Ethernet port connected to the Mx computer so the Mac computer can
communicate with it.
Note: If you are moving from a system without the Mx computer, you need to
switch off the virtual machine:
• Open VMware Fusion, then click Virtual Machine > Shut Down in the
toolbar.
• Cancel the automatic opening of VMware Fusion: Apple Menu
System Preferences > Users & Groups > Login Items and remove
VMware from the list.
1. From the top left corner of the screen, click Apple Menu
Preferences > Network.
2. If using an internet router, it must be connected to the port named Apple USB
Ethernet Adapter. In order to connect to the internet, make sure that Apple USB
Ethernet Adapter network is at the top of the list of networks, then is followed by
Ethernet. If it is not at the top of the list, click the tooth wheel icon at the bottom
of the list and select Set Service Order.
3. In the network list, click Ethernet, then:
M6 PRO | V6 | Installation
>
> System
26