Understanding Receiver Leds - Marport M6 PRO User Manual

Understanding Receiver LEDs

LEDs on the receiver are useful to know if the receiver is connected to the computer and
what types of hydrophones are connected to the receiver.
When the receiver restarts, the hydrophone and PoE LEDs light up according to a
specific sequence. At the end of the sequence:
• LEDs are off if no hydrophone is configured.
• LEDs are red or blue if hydrophones are configured.
If one or several LEDs stay green after the boot sequence, there is a problem with the
receiver. Contact your local support service.
You can refer to the PoE LED color to know if the receiver is correctly connected to the
computer.
• Blinking green: the receiver is connected to a power source and to the computer.
• Blinking blue: the receiver is connected to a power source but it is disconnected
from the computer. Check that the computer is connected to the Mx computer.
• Blinking red: Ethernet is resetting.
Boot sequence
PoE LED
M6 PRO | V6 | Installation
33