RF820/RF820-AP and RF830/RF830-AP Wizard Setup
Click the Wizard Setup button located under the Menu Bar. The following screen displays.
Use the same directions for the RF820/RF820-AP and RF830/RF830-AP.
Screen Notes:
• PPP Client for Cellular/Analog Modem Backup is available only on the
RF820/RF820-AP.
• The RF830/RF830-AP has two WAN ports; the RF820/RF820-AP has only one.
A section labeled WAN 2 displays on the RF830/RF830-AP Wizard Setup screen.
• A section labeled WLAN (inset shown on the right) displays after you select
Independent Subnet on the Network Setup > Wireless LAN screen.
18
Multi-Tech Systems, Inc. RF820/RF820-AP & RF830/RF830-AP Quick Start Guide
Chapter 3 – Configuration