Table of Contents
Advertisement
Note:
In order to ensure the best detection and LoRaWAN
install IOT-S500-IAQ3/IOT-S500-IAQ3Las follows:
➢
Do not mount the device where the temperature is below/above operating range and
temperature varies greatly.
➢
Stay far away from any heat source or cold source like oven, refrigerator.
➢
Do not mount the device close to where airflow varies greatly like windows, vent, fan and air
conditioner.
Do not mount the device upside down.
➢
Do not place the device right to the window or door. If you have to, youʼd better pull the
➢
curtain.
➢
It is recommended to install at least 1.5 m high from floor.
6. Device Payload
All data are based on following format (HEX):
Channel1
Type1
1 Byte
1 Byte
6.1 Basic Information
IOT-S500-IAQ3/IOT-S500-IAQ3L report basic information of sensor whenever joining
the network.
Channel
01 (Protocol Version)
09 (Hardware Version)
0a (Software Version)
ff
0b (Power On)
0f (Device Type)
16 (Device SN)
18 (Sensor Status)
Data1
Channel2
N Bytes
1 Byte
Type
01 =>V1
01 40 =>V1.4
01 14 =>V1.14
Device is on
00: Class A, 01: Class B, 02: Class C
16 digits
Byte 0: 00 means all sensors
®
communication work, it is recommended to
Type2
Data2
Channel 3
1 Byte
M Bytes
Description
...
1 Byte
...
17
Advertisement
Table of Contents
