Table of Contents
Advertisement
4.4 Basic Settings
Go to "Device ->Settings ->General Settings" of ToolBox App to change the reporting interval,
screen mode, etc.
Parameters
Temperature Unit
Reporting Interval
LED Indicator
Change Password
Screen Smart Mode
(IOT-S500-IAQ3 Only)
Screen Display
(IOT-S500-IAQ3 Only)
Color Theme
(IOT-S500-IAQ3 Only)
Change the temperature unit displayed on the ToolBox and screen.
Note:
1) The temperature unit in the reporting package is fixed as °C.
2) Please modify the threshold settings if the unit is changed.
Reporting interval of transmitting current sensor values to network
server. Default: 10 mins, Range: 1-1080mins
Enable or disable the traffic light indicator to indicate CO
Change the password for ToolBox App or software to read/write this
device.
When the current collected value is close to the last value (tem ≤±0.5°C
and hum ≤±3% and CO
2
power.
Note: if the screen stop updating for 10 minutes, it will update data
automatically.
Enable or disable screen display.
Select screen display backgroundcolor as White or Black.
Description
≤±50ppm), the screen will stop updating to save
threshold.
2
12
Advertisement
Table of Contents
