Buttonand Traffic Light; Dimensions - LINOVISION IOT-S500-IAQ3 Quick Start Manual

Note:
IOT-S500-IAQ3 will update data on the screen every 2 minutes if
●
IOT-S500-IAQ3 will do a full-screenrefresh after 30 times update in order to remove ghosting.
●
When IOT-S500-IAQ3 detects the temperature beyond the range from 0°C to 40°C, the screen will
●
close automatically.
● Please refer section
2.4 Button and Traffic Light
Function
Power ON/OFF
Reset to Factory
Default
Check
On/OffStatus
CO Level
2
Indication
Note: If the traffic light is disabled, it will not show air quality level indication.
2.5 Dimensions (mm)
When the CO concentration exceeds the Polluted threshold
2
When the CO concentration exceeds the Bad threshold
2
4.5.2for Excellent/Polluted/Bad threshold settings.
Action
Press and hold the power button for more
than 3 seconds
Press and hold the power button for more
than 10 seconds
Quickly press the power button
When the CO concentration exceeds the
2
threshold
Screen Smart Mode is disabled;
Light Status
Power On:Off → On
Power Off:On → Off
Quickly Blinks
Light On: Device is on.
Light Off: Device is off.
Excellent: Blinks
Polluted: Blinks
Bad: Blinks
7