Table of Contents
Advertisement
Safety Precautions
Linovision will not shoulder responsibility for any loss or damage resulting from not following the
instructions of this operating guide.
❖
The device must not be disassembled or remodeled in any way.
❖
In order to protect the security of the device, please change device password when first
configuration. The default password is 123456.
❖
Do not place the device outdoors where the temperature is below/above operating range.
Do not place the device close to objects with naked flames, heat source (oven or sunlight),
cold source, liquid and extreme temperature changes.
The device is not intended to be used as a reference sensor, and Linovison will not should
❖
responsibility for any damage which may result from inaccurate readings.
❖
The battery should be removed from the device if it is not to be used for an extended period.
Otherwise, the battery might leak and damage the device. Never leave a discharged battery
in the battery compartment.
The device must never be subjected to shocks or impacts.
❖
❖
Do not clean the device with detergents or solvents such as benzene or alcohol. To clean
the device, wipe with a soft moistened cloth. Use another soft, dry cloth to wipe dry.
Declaration of Conformity
IOT-S500-IAQ3/IOT-S500-IAQ3L is in conformity with the essential requirements and other
relevant provisions of the CE, FCC, and RoHS.
Copyright © 2011-2022 L .inovision All rights reserved.
For assistance, please contact
Linovision technical support:
Email: sales@Linovision.com
Tel: +86571-86708175
2
Advertisement
Table of Contents
