Multitech RouteFinder MTASR3 Quick Start Manual page 30

RouteFinder MTASR3 Quick Start Guide
23 Select Use default gateway on remote network. If the
circle to the left of the Use default gateway on remote
network label does NOT have a dark center, Click it.
24 Exit the TCP/IP Settings window. Click the OK button.
This button will appear two more times. Each time, Click it.
You will be returned to the "Dial-up Networking" window.
25 Dial in. Double-click your RouteFinder icon. A Connect
To window will appear.
26 Enter your User name. Your User name is provided by
your network administrator from his/her Remote User Data
Base. In the User name box, enter your user name.
27 Enter your Password. In the Password box, enter your
password. Your Password is provided by your network
administrator from his/her Remote User Data Base.
28 Save your Password.
30