Loading Your Software - Multitech RouteFinder MTASR3 Quick Start Manual

Lan-to-lan routing for central-site and branch office networks

Hide thumbs Also See for RouteFinder MTASR3:

Table of Contents

RouteFinder MTASR3 Quick Start Guide

Loading your Software

Run Windows on the PC that is connected to the

RouteFinder's Command Port.

Insert the RouteFinder 3.00 Disk 1 into the disk drive on

the PC that is connected to the RouteFinder.

Win3.1 users - access Run by clicking on the File menu in

the Program Manager, then click Run. In the Run dialog

box, type a:\setup.exe or b:\setup.exe (depending on the

letter of your floppy disk drive) in the Command Line field

and then click OK.

Win95/NT users - click Start, then Run. In the Run

dialog box click the down arrow and choose a:\setup or

b:\setup (depending on the letter of your floppy disk

drive), then click OK.

The Welcome screen is displayed.

Press Enter or click Next> to continue.

Follow the on-screen instructions to install your

RouteFinder software.

Table of Contents

Do you have a question about the RouteFinder MTASR3 and is the answer not in the manual?