Stryker Renaissance Series Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Manuals
  4. Medical Equipment
  5. Renaissance Series
  6. Maintenance manual

Stryker Renaissance Series Maintenance Manual

Hide thumbs Also See for Renaissance Series:
Table of Contents

Advertisement

Quick Links

IMPORTANT
File in your
maintenance
records
Renaissance Series
1010 Emergency Care Stretcher
1510 PACU Stretcher
721 Advanced Transport Stretcher
MAINTENANCE MANUAL
For Parts or Technical Assistance
1–800–327–0770

Advertisement

Table of Contents
loading

Related Manuals for Stryker Renaissance Series

Summary of Contents for Stryker Renaissance Series

  • Page 1 IMPORTANT File in your maintenance records Renaissance Series 1010 Emergency Care Stretcher 1510 PACU Stretcher 721 Advanced Transport Stretcher MAINTENANCE MANUAL For Parts or Technical Assistance 1–800–327–0770...

  • Page 2: Table Of Contents

    Table of Contents Introduction Specifications ............... . Warning / Caution / Note Definition .
  • Page 3 Table of Contents Assembly Drawings and Parts Lists (Continued) Short Transfer System Assembly, Right (for 1010 & 1510 stretchers with serial # before 93073000) Long Transfer System Assembly, Left . . . (for 1010 & 1510 stretchers with serial # before 93073000) Long Transfer System Assembly, Right (for 1010 &...
  • Page 4 Table of Contents Assembly Drawings and Parts Lists (Continued) Litter Assembly ....... 106–108 (for 1510 stretchers with serial # after 93073000) Stat.

  • Page 5: Introduction

    Introduction INTRODUCTION This manual is designed to assist you with the operation and maintenance of the 1010 Emergency Care Stretcher, the 1510 PACU Bed and the 721 Advanced Transport Stretcher. Read it thoroughly before using the equipment or beginning any maintenance on it. SPECIFICATIONS 1010 1510...

  • Page 6: Preventative Maintenance

    Preventative Maintenance CHECKLIST (PERFORM A MINIMUM OF TWICE A YEAR) All fasteners secure (reference all assembly prints) Siderails move and latch properly (page 7) All casters lock with brake pedal engaged (page 16) Steer function working properly All casters secure and swivel properly Body restraints working properly I.V.

  • Page 7: Cleaning

    These products are corrosive in nature and may cause dam- age to your stretcher if used improperly. If these types of products are used to clean Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried following cleaning.

  • Page 8: Service Information

    Service Information PNEUMATIC FOWLER ADJUSTMENT Required Tools: 3/32 Hex Allen Wrench 5/8 Open End Wrench 1/8 Hex Allen Wrench Channel Lock Pliers 3/16 Hex Allen Wrench Towel or Cloth 7/16 Open End Wrench Thread ”Locktite” Adjustment Procedure: 1. Refer to drawings 1010–31–90 and 1510–31–25 (Pneumatic Fowler Assembly, page 63) or 721–31–70 (Pneumatic Fowler Assembly, page 95).

  • Page 9: Siderail Latch Adjustment

    Service Information SIDERAIL LATCH ADJUSTMENT Required Tools: 1/8 Hex Allen Wrench WARNING The siderail latch adjustment is pre–set at the factory, and there should not normally be a need for readjust- ment. If adjustment must be done it is important to follow the procedure below. If it is not done properly, injury to the patient or user could occur.

  • Page 10: Pedal Linkage Adjustment - Dual Side Control Base

    Service Information PEDAL LINKAGE ADJUSTMENT – DUAL SIDE CONTROL BASE Required Tools: 3/32 Hex Allen Wrench 7/16 Open End Wrench 1/2 Open End Wrench (2) Wooden blocks (10 – 12 inches in length) Adjustment Procedure: 1. Pump the litter up to full height. 2.

  • Page 11: Pedal Linkage Adjustment - Dual End Control Base

    Service Information PEDAL LINKAGE ADJUSTMENT – DUAL END CONTROL BASE Required Tools: 7/16 Open End Wrench 1/2 Open End Wrench (2) Wooden Blocks (10 – 12 inches in length) Adjustment Procedure: 1. Pump the litter up to full height. 2. Lift the base hood, separating the hood from the base frame. Using the wooden blocks, support the base hood.

  • Page 12: Caster Assembly Replacement

    Service Information CASTER ASSEMBLY REPLACEMENT* Required Tools: 1/8 Roll Pin Punch Drill with 1/8 inch Drill Bit Flat Punch (any size larger than 1/8) Hammer Needle Nose Pliers Floor Jack 3/4 Inch Wrench (2) Wooden Blocks (10 – 12 inches in length) 1 Inch Wrench Torque Wrench (w/ Ft.

  • Page 13: Caster Cover Installation And Removal

    Service Information CASTER COVER INSTALLATION AND REMOVAL Looking through the larger of the two side cut–outs, align cover with axle nut or bolt head, as shown. Double Prongs Push down on the opposite side of the cover until single prong engages with caster horn. Single Prong Top View (Cut–Away) Properly Attached...
  • Page 14 Service Information CASTER MAINTENANCE Required Tools: 5/8” Wrench 11/16” Wrench Maintenance Procedure: Remove the plastic caster cover (see page 10.1). Using the 5/8” wrench and the 11/16” wrench, remove the centerlock nut (item A) from the through bolt (item B) for the caster wheel. Support the corner of the stretcher where the wheel is being removed and remove the through bolt (item B) and the molded wheel (item C) .

  • Page 15: Hydraulic System Troubleshooting

    Jack will not pump up and the jack actuator rod Remove excess air (vacuum) in system (see p. may or may not move. 12). Contact Stryker technical service at 1–800–327–0770 for further assistance.

  • Page 16: Checking Hydraulic Fluid Level

    6. The hydraulic fluid should be visible at the bottom of the fill hole. If it is not, add Mobil Aero HFA hydraulic fluid (Stryker part number 2020–70–475) until the fluid is visible at the bottom of the fill hole. Replace the fill plug.

  • Page 17: Jack Descent Rate Adjustment

    Service Information JACK DESCENT RATE ADJUSTMENT Required Tools: Screwdriver (2) Wooden Blocks (10 – 12 inches in length) Adjustment Procedure: 1. Pump the litter up to full height. 2. Lift the base hood, separating the hood from the base frame. Using the wooden blocks, support the base hood.

  • Page 18: Hydraulic Check Valve Replacement

    Service Information HYDRAULIC CHECK VALVE REPLACEMENT Required Tools: 3/8 Open End Wrench Stiff Wire (with bent, pointed end) Small Needle Nose Pliers 3/4 Open End Wrench Torque Wrench (with Ft. Lbs. adjust.) 7/32 Hex Allen Wrench 1/2 Inch Diameter Rod Replacement of Valve #1 WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning...

  • Page 19: Replacement Of Valve #2

    Service Information HYDRAULIC CHECK VALVE REPLACEMENT (CONT’D) Replacement of Valve #2 WARNING To avoid personal injury or damage to the stretcher, remove the litter and the base hood before beginning service on the jacks. Lower the jack rod completely to relieve the pressure on the pump piston side of the jack.

  • Page 20: Brake Adjustment

    Service Information BRAKE ADJUSTMENT Required Tools: 3/32” Hex Allen Wrench Pry Bar Thread ”Locktite” BASE LUBRICATION Do not grease area shown. 1. Lubricate brake adjuster rod around area shown with MPG–2 grease or equivalent.
  • Page 21 Notes...
  • Page 22 715–1–250 Side Control Base Assembly (with Brakes)

  • Page 23: Side Control Base Assembly (With Brakes)

    715–1–250 Side Control Base Assembly (with Brakes) Item Part No. Part Name Qty. 715–1–245 Base Weldment Assembly 38–211 Spring 715–1–158 Caster Nut 715–1–61 Caster Brake Assembly (Page 20) Brake Adjuster Assembly 715–1–231 Brake/Steering Rod Assembly 1000–10–62 Steering Lock Linkage Bar (Page 21) Brake Cam Assembly 715–1–94...

  • Page 24: Brake Adjuster Assembly

    715–1–150 Brake Adjuster Assembly Item Part No. Part Name Qty. 715–1–62 Threaded Stud Assembly 14–4 Nylon Washer 715–1–180 Bearing 28–8 Retaining Ring...

  • Page 25: Brake Cam Assembly

    715–1–213 Brake Cam Assembly Item Part No. Part Name Qty. 715–1–221 Brake Cam 16–59 Fiberlock Nut 8–21 Soc. Hd. Cap Screw 715–1–173 Brake Connecting Link...
  • Page 26 Notes...
  • Page 27 1010–90 Reduced Length Brake/Steer Base Option Steering Lock Linkage Bar p/n 1000–10–62 (Ref.) Fifth Wheel Cam p/n 715–1–161 (Ref.) Collar w/Set Screw p/n 42–20 (Ref.) Item Part No. Part Name Qty. 1010–90–10 Brake Pedal Assembly 1010–90–24 Brake Bar 715–1–165 Actuator Plate Assembly 26–35 Roll Pin 26–13...
  • Page 28 Assembly part number 716–1–251 Note: Parts and assemblies drawn with broken lines are part of optional accessories.
  • Page 29 End Control Base Assembly (with Wheels and Brakes) Item Part No. Part Name Qty. 716–1–246 Base Weldment Ass’y 8–17 Soc. Hd. Shoulder Bolt 715–1–158 Caster Nut 715–1–61 Caster Brake Assembly (Page 20) Brake Adjuster Assembly 1210–1–345 Brake/Steer Pedal, Ft. End 1210–1–346 Brake/Steer Pedal, Hd.

  • Page 30: End Control Brake Pedal Assembly, Foot

    716–1–263 End Control Brake Pedal Assembly, Foot Item Part No. Part Name Qty. 716–1–275 Brake Pedal 716–1–262 Brake Rod Ass’y, Ft. End 716–1–269 End Control Brake Pedal Assembly, Head Item Part No. Part Name Qty. 716–1–275 Brake Pedal 716–1–267 Brake Rod Ass’y, Welded NOTE Apply plastic adhesive to the mating surfaces of item A prior to assembly.

  • Page 31: Caster Assembly With Steerlock

    715–2–21 Caster Assembly with Steerlock Item Part No. Part Name Qty. 700–10–50 Steer Lock Caster Weldment 715–2–25 Caster Wheel 16–60 Hex Nut 3–99 Hex Bolt 715–3–96 Hex Bolt 1000–59–10 Latch Assembly 11–310 Flat Washer...

  • Page 32: Caster And Caster Cover Replacement Kits

    Caster and Caster Cover Replacement Kits Item Part No. Part Name Qty. 715–2–20 Caster Assembly 715–1–266 Caster Cover, Left 715–1–265 Caster Cover, Right P/N 715–259–400 – Kit to replace 4 standard caster assemblies with necessary hardware – no caster covers. P/N 715–269–400 –...
  • Page 33 Optional Fifth Wheel Base Assembly Item Part Name Part No. Qty. 3–20 Hex Hd. Cap Screw 16–16 Fiberlock Nut 16–49 Nylock Hex Nut 23–25 Hex Washer Hd. Screw 26–8 Roll Pin 81–219 Bearing (page 29) Fifth Wheel Assembly 715–1–136 Fifth Wheel Spring 715–1–149 715–1–157 Fifth Wheel Bearing...
  • Page 34 Notes 28.2...

  • Page 35: Fifth Wheel Assembly

    715–1–25 Fifth Wheel Assembly Item Part No. Part Name Qty. 715–1–339 Fifth Wheel Pivot Assembly 715–1–17 Fifth Wheel Bushing 16–11 Flexlock Nut 715–1–15 Spring 715–1–13 Fifth Wheel Bracket 16–12 Flexlock Nut 390–1–54 Wheel 3–31 Hex Head Cap Screw 3–82 Hex Head Cap Screw...
  • Page 36 Stryker Logo Label 741–34–18 741–34–18 741–34–18 ”Head Point” Label, Left 741–34–19 741–34–19 741–34–19 ”Head Point Label, Right 1010–1–50 1010–1–50 1010–1–50 Renaissance Series Logo Label 741–2–1 741–2–13 741–2–9 Right Side Control Label 741–2–2 741–2–14 741–2–10 Right Side Strip Label 741–2–3 741–2–15 741–2–11 Left Side Control Label 741–2–4...
  • Page 37 Brake/Steer Label, Head 721–1–164 716–1–79 1510–35–21 Brake/Steer Label, Foot 721–1–165 741–1–141 1510–35–19 Side Strip Label 1010–1–50 1010–1–50 1010–1–50 Renaissance Series Logo Label 946–1–60 946–1–60 946–1–60 Stryker Logo Label 741–34–18 741–34–18 741–34–18 ”Head Point” Label, Left 741–34–19 741–34–19 741–34–19 ”Head Point” Label, Right...

  • Page 38: Side Control Base Assembly (With Jacks)

    Side Control Base Assembly (with Jacks) Assembly part number 715–1–260...
  • Page 39 Side Control Base Assembly (with Jacks) Item Part No. Part Name Qty. 29–7 Dual Lock (Page 43.1) Jack Assembly 11–262 Flat Washer 3–62 Hex Hd. Cap Screw 11–3 Flat Washer 16–36 Nylock Hex Nut 715–1–192 Jack Support 3–85 Hex Hd. Cap Screw 715–1–193 Jack Support Clamp 13–38...

  • Page 40: Pedal Base Assembly, Pump

    715–1–108 Pedal Base Assembly, Pump Item Part No. Part Name Qty. 715–1–83 Pedal Ass’y Weldm’t, Pump 715–1–126 Side Control Pedal Pad 81–44 Bearing, Bronze NOTE Apply plastic adhesive to the mating surfaces of item B prior to assembly.

  • Page 41: Pedal Base Assembly, Head End, Left

    715–1–109 Pedal Base Assembly, Head End, Left Item Part No. Part Name Qty. 715–1–98 Release Ped. Wldmt., Hd. Lt. 721–40–25 Pedal NOTE Apply plastic adhesive to the mating surfaces of item B prior to assembly.

  • Page 42: Pedal Base Assembly, Head End, Right

    715–1–110 Pedal Base Assembly, Head End, Right Item Part No. Part Name Qty. 715–1–97 Release Pedal Weldment 721–40–25 Pedal NOTE Apply plastic adhesive to the mating surfaces of item B prior to assembly.

  • Page 43: Side Control Base Hood Assembly

    715–1–135 Side Control Base Hood Assembly Item Part No. Part Name Qty. 715–1–153 Hood Spacer 715–1–151 Foam Hood Mount 715–1–176 Oxygen Bottle Retainer 11–16 Washer 25–77 Pop Rivet...
  • Page 44 Side Control Base Assembly (With Jacks) 37.1...
  • Page 45 Side Control Base Assembly (With Jacks) Item Part No. Part Name Qty. 3–47 Hex Hd. Cap Screw 3–62 Hex Hd. Cap Screw 3–85 Hex Hd. Cap Screw 4–146 Soc. Hd. Cap Screw 11–3 Washer 11–4 Washer 11–262 Washer 13–38 Ext. Tooth Lock Washer 14–2 Nylon Washer 16–28...
  • Page 46 Side Release Pedal Assembly Assembly part number 1210–1–150 Item Part Name Part No. Qty. 715–1–126 Side Control Pedal Pad 1210–1–152 Side Release Pedal Weldment 37.3...
  • Page 47 Notes 37.4...
  • Page 48 Assembly part number 716–1–270 FOOT END HEAD END...

  • Page 49: End Control Base Assembly (With Jacks)

    End Control Base Assembly (with Jacks) Item Part No. Part Name Qty. 3–4 Hex Head Cap Screw 3–62 Hex Hd. Cap Screw 3–85 Hex Hd. Cap Screw 11–3 Washer 11–13 Flat Washer 11–262 Flat Washer 13–38 Ext. Tooth Lock Washer 14–2 Washer 14–3...

  • Page 50: Pump Pedal Assembly, Head

    End Control Pump Pedal Assembly, Head Assembly part number 716–1–292 Item Part No. Part Name Qty. 716–1–285 Pump Pivot, Head End 26–12 Roll Pin 716–1–290 Pump Ped. Wldmt., Head 721–40–25 Pedal End Control Pump Pedal Assembly, Foot Assembly part number 716–1–288 Item Part.No.

  • Page 51: End Control Base Hood Assembly

    716–1–99 End Control Base Hood Assembly Item Part No. Part Name Qty. 716–1–153 Hood Spacer 715–1–151 Foam Hood Mount 715–1–176 Oxygen Bottle Retainer 11–16 Washer 25–77 Pop Rivet...

  • Page 52: Jack Assembly

    715–1–310* Jack Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 45–904 O–Ring 45–110 O–Ring 715–1–340 Cap Assembly 388–1–38 Plug 390–1–243 Gasket 715–1–322 Reservoir 715–1–323 Actuator Cylinder 390–1–244 Gasket 715–1–325 Actuator 390–1–238 Gasket, Actuator 45–14 O–Ring (Page 43) Jack Base Assembly 926–20–161...

  • Page 53: Jack Base Assembly

    715–1–300 Jack Base Assembly Item Part No. Part Name Qty. 715–1–312 Base, Machined 715–1–308 Base Plug 715–1–306 28–8 Snap Ring 390–2–176 Washer 38–231 Compression Spring 45–6 O–Ring 715–1–305 Pin Housing 715–1–330 Housing Gasket 715–1–309 Valve Plug 926–20–153 Check Valve 926–20–154 Seal 715–1–318 Pump Piston...
  • Page 54 715–270–10 Jack Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 45–904 O–Ring 45–110 O–Ring 715–1–340 Cap Assembly 388–1–38 Plug 390–1–243 Gasket 715–1–322 Reservoir 715–1–323 Actuator Cylinder 390–1–244 Gasket 715–1–325 Actuator 390–1–238 Gasket, Actuator 45–14 O–Ring (page 43.2) Jack Base Assembly 926–20–161...
  • Page 55 715–270–5 Jack Base Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1210–70–12 Jack Base 45–110 O–Ring 1210–70–13 Base Plug 715–1–328 Piston Wear Ring 715–270–1 14–50 Bearing Retainer 45–966 O–Ring 715–1–327 Cylinder Wear Ring 38–311 Compression Spring 715–1–316 Pump Cylinder 45–006...
  • Page 56 1010–1–10 Folddown Siderail Litter Assembly...
  • Page 57 1010–1–10 Folddown Siderail Litter...
  • Page 58 1010–1–10 Folddown Siderail Litter Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–1–45 Frame Assembly 721–32–108 Support Roller 721–26–69 Upright Sleeve 3–76 Hex Hd. Cap Screw 3–73 Hex Hd. Cap Screw 721–26–74 Lock Handle, Mach’d 16–28 Nylock Hex Nut 1010–1–56 Bumper Channel...
  • Page 59 1510–1–10 Folddown Siderail Litter Assembly...
  • Page 60 1510–1–10 Folddown Siderail Litter Assembly...
  • Page 61 1510–1–10 Folddown Siderail Litter Assembly Item Part No. Part Name Qty. 1510–1–25 Frame Assembly 721–26–69 Upright Sleeve 1010–54–70 Socket Ass’y, Left 16–28 Nylock Hex Nut 1010–54–71 Socket Ass’y, Right 1010–26–81 Lock Housing Ass’y, Left 1010–26–80 Lock Housing Ass’y, Right (Page 72) Siderail Ass’y, Left (Page 72) Siderail Ass’y, Right...

  • Page 62: Jack Support And Trend. Limiter Assembly

    Jack Support and Trend. Limiter Assembly 1010–23–41 1510–23–20 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–23–25 Jack Supt. Ass’y, Rt. 1510–23–18 Jack Supt. Ass’y, Rt. 1010–23–30 Jack Supt. Ass’y, Lt. 1510–23–19 Jack Supt. Ass’y, Lt. 16–28 Nylock Nut 16–28...

  • Page 63: Trend. Limiter Assembly

    1010–23–34 Trend. Limiter Assembly Item Part Name Part No. Qty. 1010–23–35 Limiter Plate Ass’y 4–8 Hex Soc. Machine Screw 15–23 Hex Nut 4–142 Hex Soc. Machine Screw 715–1–114 Limiter Pin Assembly 38–233 Extension Spring 16–16 Fiberlock Nut...
  • Page 64 1510–27–19 Short Transfer System to Frame Ass’y Item Part No. Part Name Qty. (Page 55) Rt. Trans. System Ass’y (Page 54) Lt. Trans. System Ass’y 2–100 Pan Hd. Machine Screw 3–73 Hex Hd. Cap Screw 11–180 Nylon Flat Washer 10–11 Eye Bolt 16–28 Nylock Hex Nut...
  • Page 65 1510–29–15 Long Transfer System to Frame Assembly Item Part No. Part Name Qty. (Page 57) Rt. Trans. System Ass’y (Page 56) Lt. Trans. System Ass’y 2–100 Pan Hd. Machine Screw 3–73 Hex Hd. Cap Screw 11–180 Nylon Flat Washer 10–11 Eye Bolt 16–28 Nylock Hex Nut...
  • Page 66 1010–32–103 Short Transfer System Assembly, Left Item Part No. Part Name Qty. 1010–32–100 Transfer Board Ass’y 721–24–46 Label 1010–32–98 Pivot 1010–24–22 Connecting Link Ass’y 1010–32–94 Pivot Arm Ass’y, Left 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer 4–156...
  • Page 67 1010–32–104 Short Transfer System Assembly, Right Item Part No. Part Name Qty. 1010–32–100 Transfer Board Ass’y 721–24–46 Label 1010–32–98 Pivot 1010–24–22 Connecting Link Ass’y 1010–32–96 Pivot Arm Ass’y, Right 28–93 Retaining Ring 3–50 Hex Head Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer 4–156...
  • Page 68 1510–29–35 Long Transfer System Assembly, Left Item Part No. Part Name Qty. 1510–32–9 Transfer Board Ass’y 721–24–46 Label 1010–32–98 Pivot 1510–29–7 Connecting Link Ass’y 1010–32–94 Pivot Arm Ass’y, Left 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer 4–156...
  • Page 69 1510–29–34 Long Transfer System Assembly, Right Item Part No. Part Name Qty. 1510–29–10 Transfer Bd. Ass’y 721–24–46 Label 1010–32–98 Pivot 1510–29–6 Connecting Link Ass’y 1010–32–96 Pivot Arm Ass’y, Right 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer 4–156...
  • Page 70 1010–24–30 Board Support Assembly Item Part No. Part Name Qty. 1010–24–15 Support Block 1010–24–16 Support Arm 1010–24–14 Warning Label 38–263 Spring 8–17 Shoulder Bolt 1010–26–46 Ball Knob...
  • Page 71 Crank Fowler Assembly p/n 1010–1–20 Frame Assembly (Ref.) 1010–33–10 1510–33–10 Item Part No. Part Name Qty. Item Part No. Part Name (Page 60) Crk. Fow. Subass’y (Page 60) Crk. Fow. Subass’y 8–28 Shoulder Bolt 8–28 Shoulder Bolt 11–179 Washer 11–179 Washer 16–28 Lock Nut...
  • Page 72 Crank Fowler Subassembly 1010–33–13 1510–33–43 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–31–88 Skin 1510–31–46 Skin 1010–34–27 Fowler Weldment 1510–33–40 Fowler Weldment 25–103 Rivet 25–103 Rivet 37–52 Rubber Bumper 37–52 Rubber Bumper...
  • Page 73 Fowler Crankscrew Assembly 1010–34–30 1510–33–42 Item Part No. Part Name Qty. Item Part No. Part Name 1010–33–12 Pivot Tube Assembly 1510–33–12 Pivot Tube Assembly 1510–34–85 Crank Assembly 1510–34–85 Crank Assembly 946–33–18 Crank Disc 946–33–18 Crank Disc 938–1–177 Knob 938–1–177 Knob 16–5 Conelock Nut 16–5...
  • Page 74 Manual Fowler Assembly 1010–32–61 1510–32–61 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–32–106 Fowler Weldment 1510–32–66 Fowler Weldment 1010–31–88 Fowler Skin 1510–31–46 Fowler Skin 1010–32–48 Brace Assembly 1510–34–42 Brace Assembly 1010–54–26 Handle Ass’y, Rt. 1010–54–26 Handle Ass’y, Rt.
  • Page 75 Pneumatic Fowler Assembly 1010–31–90 1510–31–25 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–31–86 Fowler Weldment 1510–31–39 Fowler Weldment 1010–31–85 Handle Assembly 1510–31–36 Handle Assembly 1510–31–26 Housing 1510–31–26 Housing 1510–31–28 Yoke 1510–31–28 Yoke 946–35–25 Liner 946–35–25 Liner 28–76 Retaining Ring...
  • Page 76 Pneumatic Fowler to Frame Assembly Item Part No. Part Name Qty. 1010–31–77 Gas Cylinder 1010–31–31 Cylinder Mount 16–35 Nylock Hex Nut 14–21 Flat Washer 3–5 Hex Hd. Cap Screw 16–28 Nylock Hex Nut...
  • Page 77 Knee Gatch Assembly 1010–34–70 1510–34–70 Item Part No. Part Name Qty. Item Part No. Part Name Qty. (Page 66) Midsection Pre–Ass’y (Page 66) Midsection Pre–Ass’y (Page 66) Ft. & Thigh Pre–Ass’y (Page 66) Ft. & Thigh Pre–Ass’y 16–28 Nylock Hex Nut 16–28 Nylock Hex Nut 1010–32–60...
  • Page 78 Foot and Thigh Subass’y & Midsection Subass’y 1010–34–39 1510–34–65 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–34–62 Thigh Sect. Skin 1510–34–62 Thigh Sect. Skin 1010–34–25 Thigh Sect. Ass’y 1510–34–12 Thigh Sect. Ass’y 1010–34–26 Foot Sect. Ass’y 1510–34–13 Foot Sect.
  • Page 79 1510–34–14 Knee Gatch Crankscrew Assembly Item Part No. Part Name Qty. 946–33–18 Crank Disk 1510–34–85 Crank Assembly 26–45 Roll Pin 26–14 Roll Pin 81–176 Thrust Washer 81–175 Thrust Bearing 81–174 Thrust Washer 938–1–175 Bearing Assembly 938–1–177 Knob 378–24–29 Shoulder Bolt 16–5 Conelock Nut 946–34–25...
  • Page 80 Footsection Assembly 1010–1–36 1510–1–36 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–1–37 Footsection Wldmt. 1510–1–37 Footsection Wldmt. 1010–32–105 Footsection Skin 1510–32–23 Footsection Skin 25–103 Pop Rivet 25–103 Pop Rivet 7900–1–102 Velcro 24.5” 7900–1–102 Velcro 24.5” 16–28 Nylock Nut 16–28...
  • Page 81 Foot End Push Handle Assembly 1010–51–17 1510–51–13 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–51–19 Guard 1510–51–12 Guard 1000–58–19 Handle, Push 1000–58–19 Handle, Push 1010–51–13 Handle Socket, Rt. 1010–51–13 Handle Socket,Rt. 1010–51–14 Handle Socket, Lt 1010–51–14 Handle Socket, Lt.
  • Page 82 1510–88–18 Head End Push Handle Assembly Item Part No. Part Name Qty. 1010–1–15 Cover, Head, Left 1010–1–16 Cover, Head, Right (Page 71) Handle Assembly 26–12 Roll Pin 1010–1–35 Handle Rest 25–79 Pop Rivet...
  • Page 83 1010–1–30 Push Handle Assembly Item Part Name Part No. Qty. 1010–254–18 Sleeve Assembly 1010–254–24 Stop Link 26–10 Roll Pin 1010–254–23 Link Support...
  • Page 84 1010–26–17 & 1010–26–19 Siderail Ass’y, Right & Left (LEFT SIDERAIL IS SHOWN) Item Part No. Part Name Qty. 1010–26–15 Top Rail 1010–26–83 Upright 1010–26–84 Upright, Bent 1010–26–82 Sleeve Bearing 25–106 Semi–Tubular Rivet 1010–26–10 Round Hole Plug 1010–26–85 Upright, Latch 1010–26–12 Bent Spindle Rest...
  • Page 85 1010–22–26 Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 721–47–6 I.V. Holder 721–47–14 Retainer 1010–22–27 Cable Assembly 21–16 Set Screw 1010–22–27 Label...
  • Page 86 1010–22–10 Tethered I.V. to Frame Assembly Item Part No. Part Name Qty. 1010–22–25 Trough Assembly (Page 73) Tethered I.V. Assembly 25–92 Pop Rivet 34–22 Loop Clamp...
  • Page 87 1010–59–10 Permanent I.V. Pole Assembly Item Part No. Part Name Qty. 1010–59–24 Base Tube Ass’y 1010–59–30 Exten. Tube Ass’y 1001–59–47 Lock Ring 1001–59–46 Lock Actuator 14–20 Nylon Flat Washer As Req’d 1010–59–16 I.V. Hook 52–17 Nylon Spacer 7–4 Truss Hd. Mach. Scr.
  • Page 88 Permanent I.V. Pole Mounting Assembly 1010–80 (Foot) 1010–81 (Head) Item Part No. Part Name Qty. Item Part No. Part Name Qty. (Page 75) I.V. Pole Ass’y (Page 75) I.V. Pole Ass’y 1001–259–11 I V. Socket Ass’y 1001–259–11 I V. Socket Ass’y 4–91 But.
  • Page 89 1010–80–100 Replacement Perm. I.V. Pole Ass’y, Foot Item Part No. Part Name Qty. 16–20 Self–Locking Nut (Page 75) I.V. Pole Ass’y 1001–259–11 Socket Ass’y 4–91 But. Hd. Cap Screw 16–28 Nylock Hex Nut 4–161 Button Hd. Cap Screw 1001–59–42 I.V. Plug...
  • Page 90 1010–81–100 Replacement Perm. I.V. Pole Ass’y, Head Item Part No. Part Name Qty. 16–20 Self–Locking Nut (Page 75) I.V. Pole Ass’y 1001–259–11 Socket Ass’y 4–91 But. Hd. Cap Screw 16–28 Nylock Hex Nut 3–50 Hex Hd. Cap Screw 4–163 Button Hd. Cap Screw 1001–59–42 I.V.
  • Page 91 Replacement Permanent I.V. Pole Assembly (1510) 1510–80–100 (Foot) 1510–81–100 (Head) Item Part No. Part Name Qty. Item Part No. Part Name Qty. (Page 75) I.V. Pole Ass’y (Page 75) I.V. Pole Ass’y 1001–259–11 I.V. Socket Ass’y 1001–259–11 I.V. Socket Ass’y 4–91 But.
  • Page 92 Foot Extension/Defibrillator Tray Assembly Assembly part number 1010–50–210* Label Detail Label Detail Item Part No. Part Name Qty. Item Part No. Part Name Qty. 8–49 Socket Hd. Shoulder Bolt 1010–50–50 Knob 14–20 Nylon Washer 1010–50–57 “Max. Weight” Label 14–21 Nylon Washer 1010–50–205 Cushion Assembly 16–28...
  • Page 93 1010–23–10* Fowler X–Ray Cassette Assembly Item Part No. Part Name 1010–23–16 Tray 926–23–62 Post Housing 1010–23–24 Actuating Rod 926–23–64 Post 1010–23–36 Bearing Housing 24–10 Knob 1010–23–28 Tray Angle 926–23–70 Block Assembly 926–23–69 Washer 14–3 Washer 38–122 Compression Spring 2–10 Rd. Hd. Machine Screw 16–14 Fiberlock Nut 1–22...
  • Page 94 1010–23–11 Fowler X–Ray Cassette Mounting Ass’y Item Part No. Part Name Qty. (Page 81) X–Ray Cassette Ass’y 1010–23–32 Cassette Lock 4–149 Button Hd. Cap Screw 1010–23–39 Mtg. Bracket, Right 25–86 Pop Rivet 1010–23–38 Mtg. Bracket, Left 16–3 Self–Locking Nut...
  • Page 95 741–34* Foot Board/Chartholder Assembly Item Part No. Part Name Qty. 946–28–11 Chart Holder 741–29–18 Head/Foot Board *Replacement Part Number 741–34–100 1010–30 Upright Oxygen Bottle Holder Assembly Item Part No. Part Name Qty. 1010–30–11 Upright Bottle Holder 27–12 Cotter Pin 741–30–24 Nylon Stand–Off 1010–30–17 Spec.
  • Page 96 1010–55–10* Heel Stirrup and Support Assembly Item Part No. Part Name Qty. (Page 85) Rt. Stirrup Support Ass’y (Page 86) Lt. Stirrup Support Ass’y (Page 87) Stirrup Assembly 3–73 Hex Head Cap Screw 3–47 Hex Head Cap Screw 16–28 Nylock Hex Nut 11–158 Flat Washer *Replacement Part Number 1010–55–100...
  • Page 97 1001–55–15 Right Stirrup Support Assembly Item Part No. Part Name Qty. 1010–55–16 Right Support Tube Ass’y 1001–55–11 Mounting Bracket 650–2–32 Lock Screw Assembly 966–51–19 Wedge Lock, Modified 38–171 Compression Spring 26–7 Roll Pin 14–40 Nylon Flat Washer 24–11 Knob...
  • Page 98 1001–55–16 Left Stirrup Support Assembly Item Part No. Part Name Qty. 1010–55–26 Left Support Tube Ass’y 1001–55–11 Mounting Bracket 650–2–32 Lock Screw Assembly 966–51–19 Wedge Lock, Modified 38–171 Compression Spring 26–7 Roll Pin 14–40 Nylon Flat Washer 24–11 Knob...
  • Page 99 Heel Stirrup Assembly Assembly part number 1010–55–29 Item Part No. Part Name Qty. 390–20–13 Stirrup 390–20–9 Stirrup Holder Assembly 1010–55–30 Extension Tube Assembly 24–11 Knob 26–43 Roll Pin 22–8 Drive Screw...
  • Page 100 1010–70–1 C–Spine Cassette Holder Assembly Item Part No. Part Name Qty. 1010–70–25 I.V. Adaptor 1010–70–18 Specification Label 11–3 Flat Washer 4–91 Soc. Hd. Cap Screw (page 87.2) Support Pole Assembly (page 87.3) Storage Bracket Ass’y 16–5 Conelock Nut 37–55 3–47 Hex Hd.
  • Page 101 Optional C–Spine Support Pole Assembly (Reference page 74) View A–A Assembly part number 1010–70–10 (reference only) Item Part No. Part Name Qty. 1010–70–33 Support Tube Cap 26–6 Roll Pin 1010–70–34 Support Arm Weldment 1010–70–42 Cassette Holder Weldment 1010–70–50 Adjustment Tube Weldment 1010–70–30 Base Tube Weldment 1010–70–45...
  • Page 102 Optional C–Spine Storage Bracket Assembly (Reference page 74) 6.5” (Ref.) 2” (Ref.) Assembly part number 1010–70–19 (reference only) Item Part No. Part Name Qty. 1010–70–20 Storage Bracket Weldment 1010–70–45 Knob 1010–70–23 Storage Label 87.3...
  • Page 103 Notes 87.4...
  • Page 104 721–24–36 Basic Litter Assembly...
  • Page 105 721–24–36 Basic Litter Assembly...
  • Page 106 721–24–36 Basic Litter Assembly Item Part No. Part Name Qty. 721–32–193 Frame Assembly (page 98) Footsection Assembly 3–73 Hex Hd. Cap Screw 16–28 Nylock Hex Nut 1010–24–25 Spring Retainer 1010–32–60 Pivot Bolt 15–21 Hex Nut (page 99) Siderail Ass’y, Left (page 99) Siderail Ass’y, Right 1010–26–69...
  • Page 107 721–1–41 Jack Support and Trend. Limiter Assembly Item Part No. Part Name Qty. 721–1–311 Jack Support Ass’y, Rt. 721–1–312 Jack Support Ass’y, Lt. 16–28 Nylock Nut 3–15 Hex Hd. Cap Screw 42–7 Collar 721–32–160 Support Tube Assembly (Page 51) Trend. Limiter Assembly 46–1 Set Screw...
  • Page 108 721–24–57 Transfer System Assembly, Right Item Part No. Part Name Qty. 721–24–55 Transfer Board Ass’y 721–24–46 Label 721–24–60 Pivot, Long, Machined 721–24–59 Connecting Link Ass’y 721–24–34 Pivot Arm Ass’y, Right 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer 4–156...
  • Page 109 721–24–58 Transfer System Assembly, Left Item Part No. Part Name Qty. 721–24–55 Transfer Board Ass’y 721–24–46 Label 721–24–60 Pivot, Long, Machined 721–24–59 Connecting Link Ass’y 721–24–49 Pivot Arm Ass’y, Left 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer 4–156...
  • Page 110 721–31 Pneumatic Fowler to Litter Assembly Item Part No. Part Name Qty. (page 90) Basic Litter Assembly 1010–31–77 Gas Cylinder 1010–31–31 Cylinder Mount 3–5 Hex Hd. Cap Screw 16–28 Nylock Nut 14–21 Nylon Flat Washer 16–35 Nylock Hex Nut (page 95) Pneumatic Fowler Ass’y...
  • Page 111 721–31–70 Pneumatic Fowler Assembly Item Part No. Part Name Qty. 721–31–68 Fowler Weldment 721–31–69 Handle Assembly 1510–31–26 Housing 1510–31–28 Yoke 946–35–25 Liner 28–76 Retaining Ring 28–8 Retaining Ring 1510–31–27 Pivot 3–78 Hex Hd. Cap Screw 16–28 Nylock Hex Nut 21–119 Set Screw 4–54 Adjustment Screw...
  • Page 112 721–32 Manual Fowler to Litter Assembly Item Part No. Part Name Qty. 1010–32–62 Fowler Support 3–47 Hex Hd. Cap Screw 14–2 Nylon Flat Washer 16–28 Nylock Nut 3–54 Hex Hd. Cap Screw 721–32–168 Brace Assembly (page 90) Basic Litter Assembly 25–79 Pop Rivet (page 97)
  • Page 113 721–32–167 Manual Fowler Assembly Item Part No. Part Name Qty. 721–32–166 Fowler Weldment 721–31–50 Fowler Skin 25–101 Pop Rivet 37–52 Rubber Bumper...
  • Page 114 721–32–139 Footsection Assembly Item Part No. Part Name Qty. 721–32–20 Footsection Weldment 721–32–128 Footsection Skin 25–101 Pop Rivet 721–24–61 Pivot Arm Rest 25–79 Pop Rivet 7900–1–102 Velcro 18”...
  • Page 115 Siderail Assembly, Right & Left Assembly part numbers 721–26–96 (Right) 721–26–97 (Left) (reference only) (Left Side Shown) Item Part No. Part Name Qty. 1010–26–15 Top Rail 1010–26–83 Upright 1010–26–84 Upright, Bent 1010–26–82 Spacer 25–106 Semi–Tubular Rivet 1010–26–10 Round Hole Plug 1010–26–85 Upright, Latch 1010–26–12...
  • Page 116 721–47–10 Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 721–47–6 I.V. Holder 741–47–14 Retainer 721–47–5 Cable Assembly 21–16 Set Screw 34–22 Loop Type Clamp 25–79 Pop Rivet 721–47–12 Label 721–47–1 Hanger Bracket, Short 721–47–2 Hanger Bracket, Long 721–47–3 I.V.
  • Page 117 741–34* Foot Board/Chartholder Item Part No. Part Name Qty. 946–28–11 Chart Holder Head/Foot Board 741–29–18 *Replacement Part Number 741–34–100 721–30 Upright Oxygen Bottle Holder Item Part No. Part Name Qty. 1010–30–11 Upright Bottle Holder 721–30–12 Specification Label 741–30–24 Nylon Stand–Off 741–30–29 Bottle Holder Bracket 3–78...
  • Page 118 741–48–14 Defibrillator Tray Assembly Item Part No. Part Name Qty. 946–39–4 Tray 926–39–16 Crosstube 25–55 Rivet 926–39–9 Cover 18–6 Umbrella Nut 29–8 Dual Lock 29–10 Dual Lock 946–39–3 Support Tube 741–48–12 Label 390–57–12 Long Strap 390–57–13 Short Strap 946–1–283 Label 741–48–20 Holder 2–44...
  • Page 120 1010–201–10 Litter Assembly...
  • Page 121 End Plug (page 72) Siderail Ass’y, Left 1001–1–41 Tube Plug (page 72) Siderail Ass’y, Right 46–1 Square Hd. Screw 946–1–60 Stryker Logo Label 1001–201–29 Plastic Insert 3–50 Hex Hd. Cap Screw 11–287 Nylon Flat Washer 37–10 Hole Plug 1001–1–37 Hd. End Jack Supt. Tube 1010–254–4...
  • Page 123 Carrier Tube, Std. (page 72) Siderail Ass’y, Lt. 11–287 Nylon Flat Washer (page 72) Siderail Ass’y, Rt. 919–30–28 Rack Guide 946–1–60 Stryker Logo Label 1010–201–50 Support Roller 3–50 Hex Hd. Cap Screw 721–32–107 Roller Sleeve 37–10 Hole Plug 1001–1–37 Jack Support Tube, Hd.
  • Page 124 1510–201–10 Litter Assembly...
  • Page 125 1010–232–20 & 1510–232–20 Stat. Foot End Ass’y Frame Assembly (Ref.) 1010–232–20 1510–232–20 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–232–21 Footsection Skin, Steel 1510–232–21 Footsection Skin, Steel 7900–1–102 Velcro Pile 24 1/2” 7900–1–102 Velcro Pile 24 1/2”...
  • Page 126 1010–332–20 & 1510–332–20 Stat. Foot End Ass’y Frame Assembly (Ref.) 1010–332–20 1510–332–20 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–332–21 Ftsec. Skin, Fiberresin 1510–332–21 Ftsec. Skin, Fiberresin 7900–1–102 Velcro Pile 24 1/2” 7900–1–102 Velcro Pile 24 1/2”...
  • Page 127 1001–31–10 & 1501–31–10 Pneumatic Fowler Ass’y Fowler Skin (ref.) Fowler Frame (ref.) p/n 1010–231–12 or p/n 1001–31–13 or p/n 1510–231–12 p/n 1501–31–13 Frame Assembly (ref.) p/n 1010–201–20 or p/n 1510–201–20 1001 1501 Item Part No. Part Name Qty. Item Part No. Part Name Qty.
  • Page 128 Pneumatic Fowler to Frame Assembly Assembly part number 1710–31–10 Item Part No. Part Name Qty. 4–182 But. Hd. Cap Screw 4–183 But. Hd. Cap Screw 11–179 Nylon Washer 14–21 Nylon Washer 16–11 Nylock Hex Nut 16–35 Nylock Hex Nut 23–100 Self–Tapping Screw 25–50 Pop Rivet...
  • Page 129 Pneumatic Fowler Assembly (Fiberresin) Assembly part number 1710–31–120 Item Part No. Part Name Qty. 4–161 But. Hd. Cap Screw 7–20 Truss Hd. Mach. Screw 25–124 Pop Rivet 15–37 Jam Nut 15–50 Hex Nut 16–28 Nylock Nut 21–125 Set Screw 21–126 Set Screw 1001–1–36 Hole Plug...
  • Page 130 Pneumatic Fowler to Frame Assembly Assembly part number 1210–31–10 Item Part No. Part Name Qty. 4–182 But. Hd. Cap Screw 4–183 But. Hd. Cap Screw 11–179 Nylon Washer 14–21 Nylon Washer 16–11 Nylock Hex Nut 16–35 Nylock Hex Nut 23–100 Self–Tapping Screw 25–50 Pop Rivet...
  • Page 131 Pneumatic Fowler Assembly (Fiberresin) Assembly part number 1210–31–120 Item Part No. Part Name Qty. 4–161 Hex Soc. But. Hd. Cap Screw 7–20 Truss Hd. Mach. Screw 25–124 Pop Rivet 15–37 Jam Nut 15–50 Hex Nut 16–28 Nylock Nut 21–125 Set Screw 21–126 Set Screw 1001–1–36...
  • Page 132 1001–33–10 & 1501–33–10 Crank Fowler Assembly Fowler Frame (ref.) p/n 1001–31–13 or p/n 1501–31–13 Frame Assembly (ref.) p/n 1001–1–20 or p/n 1501–1–20 1001 1501 Item Part No. Part Name Qty. Item Part No. Part Name Qty. 1010–234–15 Mounting Bracket Ass’y 1010–234–15 Mounting Bracket Ass’y 7–20 Truss Hd.
  • Page 133 1001–33–25 & 1501–33–25 Fowler Crankscrew Ass’y Item Part No. Part Name Qty. 1001–33–26 Drive Bar Assembly 1501–33–26 Drive Bar Assembly 958–34–718 Crank Assembly (1001) 1550–1–16 Crank Assembly (1501) 946–33–18 Crank Disc 938–1–177 Knob 16–5 Kep Nut 378–24–29 Shoulder Bolt 946–33–35 Fowler Screw 26–14 Roll Pin...
  • Page 134 1010–234–20* & 1510–234–20* Knee Gatch Assembly Frame Assembly (Ref.) 1010* 1510* Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 67) Gatch Crankscrew Ass’y (page 67) Gatch Crankscrew Ass’y 1001–34–20 Gatch Riser 1501–34–20 Gatch Riser 946–1–65 Label, Gatch Symbol 946–1–65 Label, Gatch Symbol...
  • Page 135 1010–434–20 Knee Gatch Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3–47 Hex Hd. Cap Screw 721–31–65 Litter Hole Plug (not shown) 2 3–76 Hex Hd. Cap Screw 946–1–65 Label, Gatch Symbol 4–105 Soc. Hd. Cap Screw (page 117) Gatch Crankscrew Ass’y 7–20...
  • Page 136 1510–434–20 Knee Gatch Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3–47 Hex Hd. Cap Screw 721–31–65 Litter Hole Plug (not shown) 2 3–76 Hex Hd. Cap Screw 946–1–65 Label, Gatch Symbol 4–105 Soc. Hd. Cap Screw (page 117) Gatch Crankscrew Ass’y 7–20...
  • Page 137 1010–434–10 & 1510–434–10 Gatch Ass’y (Steel) Frame Assembly (Ref.) 1010 1510 Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 114) Knee Gatch Assembly (page 114) Knee Gatch Assembly 1010–234–27 Midsection Skin 1510–234–27 Midsection Skin 1010–234–28 Thigh Skin 1510–234–28 Thigh Skin...
  • Page 138 1010–534–10 & 1510–534–10 Gatch Ass’y (Fiberresin) Frame Assembly (Ref.) 1010 1510 Item Part No. Part Name Qty. Item Part No. Part Name Qty. (page 114) Knee Gatch Assembly (page 114) Knee Gatch Assembly 1010–334–27 Midsection Skin 1510–334–27 Midsection Skin 1010–334–28 Thigh Skin 1510–334–28 Thigh Skin...
  • Page 139 1001–34–19 Knee Gatch Crankscrew Assembly Item Part No. Part Name Qty. 946–33–18 Crank Disk 1550–1–16 Crank Assembly 26–45 Roll Pin 26–14 Roll Pin 81–176 Thrust Washer 81–175 Thrust Bearing 81–174 Thrust Washer 938–1–175 Bearing Assembly 938–1–177 Knob 378–24–29 Shoulder Bolt 16–5 Conelock Nut 1001–34–47...
  • Page 140 1010–232–11 Short Transfer System Assembly, Left HEAD END Item Part No. Part Name Qty. 1020–32–100 Transfer Board Ass’y 721–24–46 Label 1010–32–98 Pivot 1010–224–33 Connecting Link Ass’y 1010–232–17 Pivot Arm Ass’y, Lt. 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21 Nylon Flat Washer...
  • Page 141 1010–232–10 Short Transfer System Assembly, Right HEAD END Shaft End (Ref.) Item Part No. Part Name Qty. 1020–32–100 Transfer Board Ass’y 721–24–46 Label 1010–32–98 Pivot 1010–224–33 Connecting Link Ass’y, Rt. 1010–232–16 Pivot Arm Ass’y, Right 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21...
  • Page 142 1010–251 Foot End Push Handle to Frame Assembly Item Part No. Part Name Qty. 1010–281–11 Handle Rest 1010–201–237 Corner Cover, Hole/Hole 1010–201–236 Corner Cover, Hole/Slot 1010–254–4 Receptacle Ass’y, Left 1010–254–6 Receptacle Ass’y, Right 3–54 Hex Hd. Cap Screw 16–28 Lock Nut 3–47 Hex Hd.
  • Page 143 1010–280 & 1010–281 2– Stage I.V. Ass’y, Head & Foot 1510–280 & 1510–281 2–Stage I.V. Ass’y, Head & Foot Item 1010 P/N 1510 P/N Part Name Qty. (page 122) (page 122) I.V. Pole Assembly 1001–259–5 1001–259–5 I.V. Receptacle Ass’y 16–28 16–28 Lock Nut 3–54...
  • Page 144 1211–110–10 2–Stage I.V. Pole Assembly Item Part No. Part Name Qty. 1001–59–32 Base Tube Assembly 1001–59–31 Extension Tube Assembly 1210–110–47 Lock Ring 1210–110–49 Lock Actuator 14–20 Nylon Flat Washer As Req’d 1010–59–16 I.V. Hook 52–17 Nylon Spacer 926–400–62 Stop Sleeve 1211–110–46 Back–Up Ring 8–31...
  • Page 145 Notes...
  • Page 146 1010–61 & 1010–62 3–Stage I.V. Ass’y, Head & Foot 1510–61 & 1510–62 3–Stage I.V. Ass’y, Head & Foot Item Part No. Part Name Qty. (page 123.2 , 123.3) I.V. Pole Assembly 1001–259–5 I.V. Receptacle Assembly 16–28 Lock Nut 3–54 Hex Hd. Cap Screw 4–91 But.
  • Page 147 1010–61–10 3–Stage I.V. Pole Assembly Item Part No. Part Name Qty. 1010–61–24 Base Tube Assembly (page 123.4) 2nd Stage Assembly (page 123.5) 3rd Stage Assembly 26–6 Roll Pin 7–4 Truss Hd. Mach. Screw 52–17 Nylon Spacer 1010–59–16 I.V. Hook 14–20 Nylon Flat Washer 1010–61–14 Collar...
  • Page 148 1510–61–10 3–Stage I.V. Pole Assembly Item Part No. Part Name Qty. 1010–61–24 Base Tube Assembly (page 123.4) 2nd Stage Assembly (page 123.5) 3rd Stage Assembly 26–6 Roll Pin 7–4 Truss Hd. Mach. Screw 52–17 Nylon Spacer 1010–59–16 I.V. Hook 14–20 Nylon Flat Washer 1010–61–14 Collar...
  • Page 149 1010–61–25 2nd Stage Assembly Item Part No. Part Name Qty. 1010–61–30 2nd Tube Assembly 1210–110–46 Back–Up Ring 1210–110–47 Lock Ring 1210–110–49 Lock Actuator 123.4...
  • Page 150 1010–61–20 3rd Stage Assembly Item Part No. Part Name Qty. 38–303 Spring 1010–61–13 Ball Retainer 1010–61–15 Stop Nut 1010–61–16 Retaining Shaft 1010–61–17 Thumb Knob 1010–61–18 Hand Guard 1010–61–19 3rd Extension Rod 31–21 Ball 123.5...
  • Page 151 Notes 123.6...
  • Page 152 1001–87–20 Tethered I.V. Pole Mounting Assembly Item Part No. Part Name Qty. (page 126) Trough Assembly (page 125) I.V. Pole Assembly 34–22 Cord Clamp 25–79 Pop Rivet 4–85 Soc. Hd. Cap Screw 16–3 Nylock Nut...
  • Page 153 1001–87–18 Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 721–47–6 I.V. Holder 1010–22–27 Cable Assembly 741–47–14 Retainer 21–16 Set Screw...
  • Page 154 1001–87–22 Tethered I.V. Pole Trough Assembly Item Part No. Part Name Qty. 1001–87–23 Machined Sleeve 1001–87–16 Front Mounting Bracket 1001–87–15 Mounting Bracket Ass’y 1–22 Flat Hd. Mach. Screw 37–2 Tube Plug 946–40–110 Lock Clip 16–14 Dynalock Hex Nut...
  • Page 155 Notes...
  • Page 156 721–201–10 Litter Assembly...
  • Page 157 721–201–10 Litter Assembly Item Part No. Part Name Qty. 721–201–20 Frame Assembly 938–1–401 Collar 28–72 Retaining Ring 1001–40–12 Footboard Receptacle 23–104 Self–Tapping Screw 926–400–142 Corner Wheel 1001–201–30 Trend Support 1010–201–27 Bumper Extrusion 1001–1–36 End Plug 46–1 Square Hd. Screw 1001–201–29 Insert 1001–1–37 Jack Support Tube, Hd.
  • Page 158 721–239–10 Optional Short Transfer System Assembly HEAD END Item Part No. Part Name Qty. (page 119) Transfer System Ass’y, Rt. (page 118) Transfer System Ass’y, Lt. 10–11 Eye Bolt 38–218 Tension Spring 1010–224–25 Spring Retainer 3–78 Hex Hd. Cap Screw 11–180 Flat Washer 16–28...

  • Page 159: Long Transfer System To Frame Assembly (For 1010 & 1510 Stretchers With Serial # Before 93073000)

    721–234–10 Long Transfer System to Frame Assembly HEAD END Item Part No. Part Name Qty. (page 133) Transfer System Ass’y, Rt. (page 132) Transfer System Ass’y, Lt. 10–11 Eye Bolt 38–218 Tension Spring 721–224–25 Spring Retainer, Rt. 3–78 Hex Hd. Cap Screw 11–180 Flat Washer 16–28...
  • Page 160 721–234–12 Optional Long Transfer System Ass’y, Lt. Item Part No. Part Name Qty. 721–24–55 Transfer Board Ass’y 721–24–46 Label 721–224–16 Long Pivot, Machined 721–224–33 Connecting Link Ass’y 721–232–17 Pivot Arm Ass’y, Lt. 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21...
  • Page 161 721–234–13 Optional Long Transfer System Ass’y, Rt. Item Part No. Part Name Qty. 721–24–55 Transfer Board Ass’y 721–24–46 Label 721–224–16 Long Pivot, Machined 721–224–33 Connecting Link Ass’y, Rt. 721–232–16 Pivot Arm Ass’y, Right 28–93 Retaining Ring 3–50 Hex Hd. Cap Screw 11–224 Nylon Flat Washer 14–21...
  • Page 162 721–231–10 Pneumatic Fowler Assembly Fowler Frame (Ref.) Fowler Skin (Ref.) Frame Assembly (Ref.) Item Part No. Part Name Qty. 1010–31–78 Gas Spring 14–21 Nylon Flat Washer 16–35 Nylock Hex Nut 4–182 Pivot Bolt 1001–31–30 Yoke Housing 721–231–18 Trip Bar Assembly 15–50 Hex Nut 21–126...
  • Page 163 721–231–110 Pneumatic Fowler to Frame Assembly HEAD END Item Part No. Part Name Qty. 4–182 Hex Soc. But. Hd. Cap Screw 4–183 Hex Soc. But. Hd. Cap Screw 11–179 Washer 14–21 Washer 15–59 Hex Jam Nut 16–11 Hex Nut 16–35 Hex Nut 23–100 Self–Tapping Screw...
  • Page 164 721–231–120 Pneumatic Fowler Assembly Item Part No. Part Name Qty. 4–135 But Hd. Cap Screw 4–161 Hex Soc. But. Hd. Cap Screw 7–34 Truss Hd. Mach. Screw 15–37 Jam Nut 15–50 Hex Nut 16–28 Nylock Nut 21–125 Set Screw 21–126 Set Screw 721–231–12 Fowler Skin...
  • Page 165 Optional Pneumatic Fowler Outer Housing Assembly part number 1210–31–106 (Right) Item Part No. Part Name Qty. 25–144 Semi–Tubular Rivet 1210–31–103 Pivot Tab 1210–31–104 Outer Housing, Right Assembly part number 1210–31–107 (Left) Item Part No. Part Name Qty. 25–144 Semi–Tubular Rivet 1210–31–103 Pivot Tab 1210–31–105...
  • Page 166 Notes 134.4...
  • Page 167 721–232–10 Manual Fowler Assembly Item Part No. Part Name Qty. 721–232–19 Brace Assembly 14–2 Nylon Flat Washer 3–54 Hex Hd. Cap Screw 16–28 Nylock Hex Nut 3–47 Hex Hd. Cap Screw 1001–32–22 Position Bar Rest 4–135 But. Hd. Cap Screw 16–3 Lock Nut 1001–32–26...
  • Page 168 721–280 & 721–281 2–Stage I.V. Assembly, Head & Foot Item Part No. Part Name Qty. (page 122) I.V. Pole Assemby 1001–259–5 I.V. Receptacle Ass’y 16–28 Lock Nut 3–54 Hex Hd. Cap Screw 4–91 But. Hd. Cap Screw 3–50 Hex Hd. Cap Screw 16–20 Self–Locking Nut 1001–59–40...
  • Page 169 Notes 135.2...
  • Page 170 721–61 & 721–62 3–Stage I.V. Assembly, Head & Foot Item Part No. Part Name Qty. (page 135.4) I.V. Pole Assembly 1001–259–5 I.V. Receptacle Ass’y 16–28 Lock Nut 3–54 Hex Hd. Cap Screw 4–91 But. Hd. Cap Screw 3–50 Hex Hd. Cap Screw 16–20 Self–Locking Nut 135.3...
  • Page 171 721–61–10 3–Stage I.V. Pole Assembly Item Part No. Part Name Qty. 721–61–24 Base Tube Assembly (page 135.5) 2nd Stage Assembly (page 135.6) 3rd Stage Assembly 26–6 Roll Pin 7–4 Truss Hd. Mach. Screw 52–17 Nylon Spacer 1010–59–16 I.V. Hook 14–20 Nylon Flat Washer 1010–61–14 Collar...
  • Page 172 721–61–25 2nd Stage Assembly Item Part No. Part Name Qty. 721–61–30 2nd Tube Assembly 1210–110–46 Back–Up Ring 1210–110–47 Lock Ring 1210–110–49 Lock Actuator 135.5...
  • Page 173 721–61–20 3rd Stage Assembly Item Part No. Part Name Qty. 38–303 Spring 1010–61–13 Ball Retainer 1010–61–15 Stop Nut 1010–61–16 Retaining Shaft 1010–61–17 Thumb Knob 1010–61–18 Hand Guard 721–31–69 3rd Extension Rod 31–21 Ball 135.6...
  • Page 174 721–287–20 Tethered I.V. Pole Mounting Assembly Item Part No. Part Name Qty. (page 137) Trough Assembly (page 125) I.V. Pole Assembly 34–22 Cord Clamp 25–79 Pop Rivet 4–85 Soc. Hd. Cap Screw 16–3 Nylock Nut...
  • Page 175 721–287–22 Tethered I.V. Pole Trough Assembly Item Part No. Part Name Qty. 1001–87–23 Machined Sleeve 721–287–16 Front Mounting Bracket 721–287–15 Mounting Bracket Ass’y 1–22 Flat Hd. Mach. Screw 37–2 Tube Plug 946–40–110 Lock Clip 16–14 Hex Nut...
  • Page 176 721–117 Tethered I.V. Pole Mounting Ass’y HEAD END Item Part No. Part Name Qty. 4–66 Soc. Hd. Cap Screw 11–16 Washer 16–3 Fiberlock Nut 25–79 Rivet 34–22 Cable Clamp 1001–59–40 I.V. Plug (page 137.2) Tethered I.V. Pole Assembly 1211–117–21 Backing Plate 1211–117–22 I.V.
  • Page 177 1210–117–10 Optional Tethered I.V. Pole Assembly Item Part No. Part Name Qty. 4–232 Button Hd. Cap Screw 14–20 Nylon Washer 24–53 Knob 52–17 Spacer 926–400–62 Stop Sleeve 1010–22–27 Cable Assembly 1010–59–16 I.V. Hook 1211–117–11 Extension Rod 1211–117–12 Base Tube Weldment 137.2...
  • Page 178 1001–70 C–Spine Cassette Holder Assembly Item Part No. Part Name Qty. 1010–70–25 I.V. Adaptor 1010–70–18 Specification Label 11–3 Flat Washer 4–91 But. Hd. Cap Screw (page 87.2) Support Pole Assembly (page 87.3) Storage Bracket Ass’y 16–28 Nylock Nut 3–50 Hex Hd. Cap Screw 1001–70–11 Attachment Bracket 3–47...
  • Page 179 926–39 Optional Defibrillator Tray Assembly Assembly part number 926–39–10 (reference only) Item Part No. Part Name Qty. Item Part No. Part Name Qty. 946–39–4 Tray 926–1–82 Label 926–39–16 Crosstube 390–57–12 Long Strap 25–55 Rivet 390–57–13 Short Strap 926–39–9 Cover 946–1–283 Label 18–6 Umbrella Nut...
  • Page 180 926–40–100 Optional Foot Board/Chartholder Ass’y Assembly part number 926–40–10 (reference only) Item Part No. Part Name Qty. 946–28–100 Chart Holder 946–29–1 Foot Board 1020–30 Optional Upright Oxygen Bottle Holder Ass’y Item Part No. Part Name Qty. 1020–30–11 Upright Bottle Holder 27–12 Cotter Pin 1020–30–17...
  • Page 181 1001–23–10 Fowler X–Ray Cassette Assembly Item Part No. Part Name Qty. 1001–23–12 Tray 1020–23–16 Post Housing 1001–23–14 Actuating Rod 926–23–64 Post 1010–23–37 Rod Guide 1020–23–21 Knob 1010–23–28 Tray Angle 926–23–70 Block Assembly 926–23–69 Washer 14–3 Washer 38–122 Compression Spring 1020–23–26 Spacer 1020–23–19 Tray Hinge, Right...
  • Page 182 1001–23–11 X–Ray Cassette Mounting Assembly Item Part No. Part Name Qty. (page 141) X–Ray Cassette Ass’y 16–3 Self–Locking Nut 4–149 Button Hd. Cap Screw 1001–23–13 Tray Latch 1020–23–13 Tray Hinge, Right 1020–23–12 Tray Hinge, Left 25–69 Pop Rivet...
  • Page 183 781–1–16 Specification Label 741–1–145 741–1–145 Brake/Steer Label, Head 741–1–146 741–1–146 Brake/Steer Label, Foot 946–1–60 946–1–60 Stryker Logo Label 1010–1–50 1010–1–50 Renaissance Series Logo Label 715–1–176 715–1–176 Oxygen Bottle Holder 11–16 11–16 Flat Washer 25–77 25–77 Pop Rivet 715–1–134 715–1–134 Bellows 921–1–252...
  • Page 184 Side Control Graphics Color Item A Control Item B Control Item C Stripe Item D Stripe Litter Bumper Label, Right Label, Left Label, Right Label, Left 1010–700–11 1010–700–12 1010–700–13 1010–700–14 1010–700–15 PURPLE 1010–700–21 1010–700–22 1010–700–23 1010–700–24 1010–700–25 GREEN 1010–700–31 1010–700–32 1010–700–33 1010–700–34 1010–700–35...
  • Page 185 End Control Graphics Color Item A Control Item B Control Item C Stripe Label Litter Bumper Label, Head Label, Foot 1010–800–11 1010–800–12 1010–800–13 1010–700–15 PURPLE 1010–800–21 1010–800–22 1010–800–23 1010–700–25 GREEN 1010–800–31 1010–800–32 1010–800–33 1010–700–35 GRAY 1010–800–41 1010–800–42 1010–800–43 1010–700–45 TEAL 1010–800–51 1010–800–52 1010–800–53...
  • Page 186 Side Control Base Labeling Assembly (721) Item Part No. Part Name Qty. 1001–100–1 Hood Assembly 715–1–134 Bellows 29–7 Dual Lock (not shown) 29–9 Dual Lock (not shown) 741–1–145 Brake/Steer Label, Head 741–1–146 Brake/Steer Label, Foot 946–1–60 Stryker Logo Label 721–201–17 Riser Tube 721–32–90 Specification Label...
  • Page 187 Side Control Graphics Color Item A Control Label, Right Item B Control Label, Left Litter Bumper Strip 1001–700–111 1001–700–112 1010–700–15 PURPLE 1001–700–121 1001–700–122 1010–700–25 GREEN 1001–700–131 1001–700–132 1010–700–35 GRAY 1001–700–141 1001–700–142 1010–700–45 TEAL 1001–700–151 1001–700–152 1010–700–55 PINK 1001–700–161 1001–700–162 1010–700–65 BLUE 1001–700–171 1001–700–172...
  • Page 188 Notes...
  • Page 189 Item 1010 P/N 1510 P/N Part Name Qty. 1010–244–17 1010–244–17 Hood Assembly 741–1–131 781–1–16 Specification Label 1010–1–50 1010–1–50 Renaissance Series Logo Label 946–1–60 946–1–60 Stryker Logo Label 11–16 11–16 Flat Washer 25–77 25–77 Pop Rivet 715–1–176 715–1–176 Oxygen Bottle Holder 715–1–134...
  • Page 190 End Control Base Labeling Assembly (721) Item Part No. Part Name Qty. 1001–100–1 Hood Assembly 715–1–134 Bellows 29–7 Dual Lock (not shown) 29–9 Dual Lock (not shown) 946–1–60 Stryker Logo Label 721–201–17 Riser Tube 721–32–90 Specification Label...
  • Page 191 End Control Graphics (1010 & 1510) Reference previous page for dept. label part numbers. Color Item A Control Item B Control Item C Stripe Litter Bumper Item E Right Item F Left Label, Head Label, Foot Label Side Stripe Side Stripe 1010–800–11 1010–800–12 1010–800–13...
  • Page 192 End Control Graphics (721) Reference below for dept. label part numbers. Color Item A Control Label, Item B Control Item C Stripe Label Litter Bumper Strip Head Label, Foot 1001–800–11 1001–800–12 1001–800–13 1010–700–15 PURPLE 1001–800–21 1001–800–22 1001–800–23 1010–700–25 GREEN 1001–800–31 1001–800–32 1001–800–33 1010–700–35...
  • Page 193 Replacement Parts and Kits PART NAME PART NUMBER Chest Restraint Strap ..........1010–58 Body Restraint Straps .
  • Page 194 If requested by Stryker, products or parts for which a warranty claim is made shall be returned prepaid to Stryker’s factory. Any improper use or any alteration or repair by others in such manner as in Stryker’s judgement affects the product materially and adversely shall...
  • Page 195 Claim will be limited in amount to the actual replacement cost. In the event that this information is not received by Stryker within the fifteen (15) day period following the delivery of the merchandise, or the damage was not noted on the delivery receipt at the time of receipt, the customer will be responsible for payment of the original invoice in full.
  • Page 196 6300 Sprinkle Road, Kalamazoo, MI 49001–9799 (800) 327–0770 DH 8/97 1010–32–52 REV X...

This manual is also suitable for:

Renaissance 1010Renaissance 1510Renaissance 721

Table of Contents