Am/Fm Tuner Operation - Emotiva UMC-1 Operation Manual

When you press 'Next', Emo-Q will allow you to choose where you want to save the completed room correction and
speaker settings to. You have three choices; Manual1, Manual2 and Manual3. This allows you to save the Emo-Q
settings and to also set up two other selections manually.
You can also go into the Emo-Q settings and adjust these manually to suit your specific needs after you have accepted
and saved the settings. Each input can be set up independently with a different Eq.
LOAD DEFAULT
•
You can return all of your UMC-1's settings to the original factory default. If you get into a real bind and feel like you
have messed it all up, fear not. By loading defaults it will erase all user settings and start anew.
•

AM/FM TUNER OPERATION

This section describes how to setup the TUNER in the UMC-1. Make sure the appropriate antennas are connected for
the best reception. In the main input setup menu make sure TUNER is highlighted. On the right you will see the options
available to you.
BAND
•
Chooses AM or FM
FREQUENCY
•
Displays the current frequency.
FM MODE
•
Allows you to choose what mode you want to listen to the tuner. You can choose STEREO or MONO.
AUTO TUNING
•
Pressing enter on the remote control the UMC-1 will automatically tune in any local stations that are available and store
them as presets.
MANUAL UP
•
Allows you to scroll up through the stations.
MANUAL DOWN
•
Allows you to scroll down through the stations.
MEMORY
•
Allows you to add your favorite stations to the UMC-1's memory. You can store 6 presets in AM and 24 in FM.
INPUT LEVEL
•
Sets the input level. This allows you to make sure all your inputs are set to the same volume level.
TRIGGER
•
Sets your triggers for the tuner to turn on the amplifiers you choose.
2ND ZONE OPERATION
•
With the Zone-2 feature active you can listen to what is playing in the main theater or any other analog input
somewhere else in the house. If you want to listen to the main theater in Zone-2 the UMC-1 will down mix the audio to
two channel. You can also listen to another analog source (ex. CD Player) while a BluRay (DVD) is playing in the main
theater as long as the source is connected to one of the analog inputs listed below.
You have a variety of options that will allow you enjoy your UMC-1 in another room, outside on the patio or by the
pool.
Go to the MAIN MENU and scroll down to Zone 2. Once there you have the following options.
41