Connecting To An Analog Tv - Emotiva UMC-1 Operation Manual

• CONNECTING TO AN ANALOG Display
Display (rear)
Processor
Connect high quality Component Video cables to the component video out of the UMC-1 and then run them to the
component video input on your TV. Component video cables are made up of what looks like 3) RCA cables bonded
together. These are marked with three different color bands (Red, Green and Blue). Be sure to connect the proper
color cable to each output (of the UMC-1) and to the inputs of your TV (they will all be marked with the proper colors).
Please note: Very good picture quality can be achieved using Component Video cables, but if your source unit is run
into the UMC-1 via HDMI, not all broadcast or movies are allowed to converted and output over component video.
17