•
GETTING THE MOST OUT OF YOUR UMC-1 REMOTE CONTROL
Make sure you use high quality batteries and replace them when you notice a reduction in the range and
operation of the remote control.
If at all possible make sure there is no direct sunlight or fluorescent light shining on the remote sensor of the
UMC-1.
Make sure there are no obstacles between the remote control and remote sensor on the UMC-1. The remote
is capable of operating up to 40-feet.
•
BATTERY NOTES
Remember to install the supplied batteries in your remote prior to use
#2 Phillips
Use a
Use 2 high quality "N" batteries - provided
Using batteries incorrectly could result in leakage and bursting.
Do not mix old and new batteries together.
Always use identical batteries.
Make sure the plus (+) and the minus (-) ends match those in the battery compartment in the remote control.
screw driver to remove the back panel of the UMC-1
27