•
CONNECTING TO A MULTI-CHANNEL AMPLIFIER
Processor
Amplifier
Use good quality RCA cables to connect the 7.1 channels of output from the UMC-1 to the inputs on your multi-channel
amplifier. You can use multiple amplifiers in place of a single multi-channel amplifier. They basically wire up in the
same way. If you have any questions on how to wire them, please contact Emotiva Audio Corp. for information.
There are two separate subwoofer outputs on the UMC-1. RCA (yellow) and XLR/Balanced (red). These hook directly up
to your powered subwoofer. Either can be used and are always active when there is a signal present.
15