TEFAL Turbo Cuisine Maxi Manual page 17

• After a few seconds, the appliance will automatically switch to
standby mode. The screen displays
• Press for 3 seconds to stop the program at any time.
Oatmeal/Porridge program
• Place the ingredients in the cooking pot and completely close
and lock the lid.
• Turn the control panel knob to the right to reach Oatmeal/Porridge
program . The screen displays the default cooking time.
• Optional: Press and set the desired time by turning the
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen
displays alternatively
light indicator turns on.
• When the pre-heating phase is completed, the appliance
switches automatically to cooking phase. The screen
displays the count down and the cooking in progress
light indicator turns on.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch
to keep warm phase. The screen displays
warm light indicator turns on.
• Press for 3 seconds to stop the program at any time
32
.
& and the pre-heating
and the keeping
Manual Mode
• Place the ingredients in the cooking pot and close the lid or not
depending on your recipe.
• Turn the control panel knob to the right to reach Manual Mode
. The screen displays the default cooking time.
• Optional: Press and set the desired time by turning the
control panel knob to the right (to increase time) or to the left
(to decrease time).
• Optional: Press and set the desired temperature by turning
the control panel knob to the right (to increase temperature) or
to the left (to decrease temperature).
• Press to start the cooking program.
• The appliance starts the pre-heating phase. The screen displays
alternatively & and the pre-heating light indicator
turns on.
• When the pre-heating
appliance switches automatically to cooking phase. The screen
displays the count down and the cooking in progress light
indicator turns on.
• At the end of the count down, the appliance beeps and the
screen displays .
• After a few seconds, the appliance will automatically switch to
standby mode. The screen displays
• Press for 3 seconds to stop the program at any time.
phase is completed,
.
EN
the
33