Renault Arcana User Manual page 247

REVERSING CAMERA
2
Settings
While the engine is running, from the
multimedia screen 2 you can add or
remove the guides and adjust the
camera image settings (brightness,
contrast etc.). Please refer to the mul-
timedia instructions for further informa-
tion.
(2/2)
The screen shows a reverse mirror
image.
The frames are a representation
projected on a flat surface. This in-
formation is to not be taken into ac-
count when superimposed on a
vertical object or an object on the
ground.
Objects which appear on the edge
of the screen may be deformed.
In very bright light (snow, vehicle in
sunshine, etc.), the camera vision
may be adversely affected.
If the boot is open or poorly closed,
the message "WARNING: Boot
Open" appears and the reversing
image could be disappeared.
This function is an additional
aid. It cannot, therefore,
under any circumstances
replace the vigilance or the
responsibility of the driver.
The driver should always be ready
for sudden incidents while driv-
ing: always ensure that there are
no small, narrow moving obstacles
(such as a child, animal, pushchair,
bicycle, stone, post, etc.) in the blind
spot when manoeuvring.
2.127