Renault Arcana User Manual page 207

CRUISE CONTROL
4
3
2
Putting the function on
standby
The function is set to standby if you:
– 4 switch (0);
– the brake pedal;
– depress the clutch pedal or shift into
neutral if the vehicle has an auto-
matic gearbox.
The cruising speed is stored and dis-
played in grey on the instrument panel.
(4/5)
6
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road condi-
tions are suitable (traffic, road surface,
weather conditions, etc.). Press the
switch 3 (RES/+) if the vehicle speed is
above 19 mph (30 km/h).
When the speed is stored, cruise con-
trol activation s confirmed by display of
the cruising speed and, depending on
the vehicle, the 6 warning light is dis-
played.
NB: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
When the cruise control is set to
standby, pressing switch 2 (SET/-) re-
activates the cruise control function
without taking into account the stored
speed: it is the speed at which the vehi-
cle is moving that is taken into account.
2.87