Table of Contents
Advertisement
1. Cleaning Condenser
• Clean the condenser and air filter regularly. Condenser and filter may need to
be cleaned at least every 6 months.
• Condenser and air filter are located on the ambient air intake side of the
cooling unit.
• Use a condenser brush or a vacuum cleaner with an extended attachment to
clean the condenser.
• Air filter is washable and reusable.
2. Removing Condensate
Remove the excessive condensate if it is accumulated on the cooling unit in high
humidity conditions.
3. Removing Unit
When you remove the cooling unit, beware water may come out of the unit.
4. Installing Drain Line
The unit is equipped with
an additional drain fitting.
In
case
of
extreme
humidity there is a drain
line needed, remove the
drain plug on the bottom
left
at
the
rear,
remove
the
connection
plug and fit a 0.375" OD
drain tube into the drain
connection.
Install
cooling unit with the front
higher than the rear.
Care Guide
then
the
- 24 -
Advertisement
Table of Contents
