Related Manuals for Vinotemp element EL-BWC103-03
Summary of Contents for Vinotemp element EL-BWC103-03
- Page 1 EL-BWC103-03 WINE & BEVERAGE COOLER A PROUD HERITAGE OF EXPERIENCE & QUALITY 732 South Racetrack Road, Henderson, NV 89015 | 1.800.777.8466 | info@vinotemp.com | www.vinotemp.com...
- Page 3 YOUR WINE AND BEVERAGE COOLER This unit can be used for storage and/or service. The unit has a glass door and soft interior light that you can use to display your wine and beverages . SERVING BEVERAGES Storing beverages at the proper temperature is important. To preserve them as long as possible beverages should be stored at approximately 39°...
- Page 4 New Leaf will be there to assist! Usable for any Wine Cellar or other electronic device manufactured by Vinotemp. Add this warranty to purchases made from vinotemp.com or other qualified venders. Warranty must be registered within the first 10 days from original purchase.
-
Page 5: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS................. 5 ELECTRICAL CONNECTION.....................6 PARTS AND SPECIFICATIONS....................7 BOTTLE CAPACITY........................8 INSTALLATION ........................9-10 OPERATING YOUR BEVERAGE COOLER..............10-12 CARE AND MAINTENANCE....................13 TROUBLESHOOTING........................14 TERMS OF SALE AND WARRANTY..................15 SERVICE & IMPORTANT NOTICE..................23... -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Do not operate this or any other appliance with a damaged cord. Do not operate if housing is removed or damaged. Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to ... -
Page 7: Electrical Connection
ELECTRICAL CONNECTION For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected grounding- type outlet. Do not under any circumstances cut or remove the third ground prong from the power cord ... -
Page 8: Parts And Specifications
PARTS AND SPECIFICATIONS ① Top hinge ② Stainless steel glass door ③ Stainless steel handle ④ Exhaust grill ⑤ Adjustable feet ⑥ Control panel ⑦ Metal and glass shelves Model EL-BWC103-03 Voltage AC 115V Frequency 60Hz Ambient Temp Range 41-100°F / Humidity 45-90% Control Temp Range Left/Right Zone39-65°F Refrigerant... -
Page 10: Installation
INSTALLATION Remove all packing material before using your beverage cooler. IMPORTANT: Before connecting the unit to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. This unit is designed for freestanding or built in installation but indoor use only. -
Page 11: Operating Your Beverage Cooler
INSTALLING THE STAINLESS STEEL HANDLE This beverage cooler includes a stainless steel handle that is not required to operate this unit. To install the handle please follow the below instructions: ① Pull away the door gasket in the area where the handle is to be installed. - Page 12 ②Down Used to lower (cool) the set temperature by 1°C or 1°F . When the screen is flashing, press it once, the temperature setting is down by 1°C or 1°F , the lowest setting temperature is 4°C （39°F） . Stop to press any button for 5 seconds, then the number stop flashing to show the actual temperature of the cabinet.
- Page 13 SHELVES To prevent damaging the door gasket, make sure the door is fully open when pulling shelves out of the rail compartment. For easy access to the bottles stored, pull the shelves out approximately 90%. Only pull out one shelf at a time. Never attempt to pull more than one. ...
-
Page 14: Care And Maintenance
CARE AND MAINTENANCE CLEANING YOUR BEVERAGE COOLER IMPORTANT: Always unplug the unit before cleaning or performing maintenance. Never use harsh cleansers or scouring pads to clean any part of the unit. Turn off the power, unplug the appliance, and remove all items including shelves. ... -
Page 15: Troubleshooting
PROBLEMS WITH YOUR BEVERAGE COOLER Most common problems can be solved easily, saving you the cost of a possible service call. Try the following suggestions to see if you can solve the problem before contacting Vinotemp at Info@Vinotemp.com. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE ... -
Page 16: Terms Of Sale And Warranty
(Box here for check mark) Accept Terms & Conditions Vinotemp International Corp. (“Seller”) and the person or entity that acquires these goods from Seller (“Purchaser”) hereby fully agrees to the following terms and conditions of the sale: Shipping/Delivery fees are the responsibility of the Purchaser whether freight prepaid or freight collect. - Page 17 We are a manufacturer not a shipping company, deliveries are done by a 3 party service. Email us at info@vinotemp.com for a quote or any additional information. Freight discussed is Continental USA (excluding Alaska, Puerto Rico, Hawaii), cost is additional please email info@vinotemp.com for a quote.
- Page 18 freight company, and Purchaser cancels rather than accepts a replacement, the order can be cancelled by paying for freight costs both ways and a 35% restocking fee for stocked items. No cancellation or refunds on custom/made or made to order products. When shipped 3rd Party (FOB Warehouse), Purchaser assumes all responsibility for delivery, payment of freight and freight claims for damages during shipment.
- Page 19 Any third party repair facility must be preapproved in writing by Seller, before providing replacement parts under warranty. Change Orders: Custom units already in production that require a change will be subject to a change order fee. Storage Fees: When having an item serviced by a Vinotemp service technician at the Vinotemp...
- Page 20 30 day period once they have been notified by Vinotemp through phone call, email, or letter that their unit is ready for pick up. If the item remains in the Vinotemp warehouse after 30 days but no longer than 60 days, the Purchaser will incur additional storage fees of 2%. After 60 days in storage, the item will become property of Vinotemp.
- Page 21 (“Purchaser”) hereby fully agrees to the following terms and conditions of the sale: 1. Freight: Vinotemp is not a freight, moving or installation company, if Freight is arranged for the Buyer, the Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Seller’s premises, including, but not limited to, late delivery by the moving carrier,...
- Page 22 Note: Unfinished wood is subject to warping; all wood surfaces must be sealed before placing cellar into service. Improper placement of the unit will void the warranty. By Vinotemp in writing, any 3rd party repair facility must be pre- approved before providing parts free of charge.
- Page 23 terms and conditions or to the goods sold generally, Purchaser must first file a written claim with Seller within thirty days of the occurrence giving arise to the claim and wait an additional thirty days for a response before initiating any legal action. Any legal proceeding arising out of or relating to these terms and conditions or to the goods sold generally shall be brought solely in the County of Los Angeles.
-
Page 24: Service & Important Notice
Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject to change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.