Safety Instructions - Advanced Energy Thyro-S 1S H 1 Series Manual

SAFETY INSTRUCTIONS

The following safety and operating instructions must be carefully
read before assembly, installation and commissioning.
OBLIGATION TO GIVE INSTRUCTIONS
The following safety and operating instructions must be carefully read
before initial assembly, installation and commissioning of Thyro-S by
those persons working with or on Thyro-S.
These operating instructions are part of the Thyristor switch Thyro-S.
The operator of this device is obliged to provide, without restriction,
these operating instructions to all persons transporting, commissioning,
maintaining or performing other work on this device.
In accordance with the Product Liability Act, the manufacturer of a
product has an obligation to provide explanations and warnings as
follows:
• the use of the product other than for the intended use,
• the residual product risk as well as
• operating errors and their consequences.
The information given below must be understood in this respect. It is
to warn the product user and protect him and his systems.
PROPER USE
• The Thyristor switch is a component which may only be used for
control and regulation of electrical energy.
• The Thyristor switch may at most be operated using the maximum
admissible connected load according to information on the type
plate.
• The Thyristor switch may only be operated in connection with a
suitable and series connected power supply disconnecting device.
• As a component, the Thyristor switch is unable to operate alone and
must be projected for its intended use to minimize residual risks.
• The Thyristor switch may only be operated in the sense of its intended
use, otherwise hazards to persons (e.g. electric shocks, burns) and
systems (e.g. overload) may arise.
3