Introduction; General; Specific Characteristics Thyro-S - Advanced Energy Thyro-S 1S H 1 Series Manual

1. INTRODUCTION

Thyro-S meets the demands for simple assembly, speedy commissioning
and safer operation.
For transport, assembly, installation, commissioning, operation and
decommissioning, it is essential that the safety instructions included
in these operating instructions are observed and made available to all
persons handling this product.
In case of uncertainties or missing information, please contact your
supplier.

1.1 GENERAL

Thyro-S is a Thyristor switch with the ability to communicate. It will also
be referred to as Power Controller or simply controller. It can be used
wherever voltages or currents need to be controlled in processing
technology. With its good coupling ability to process and automation
technology, high control precision and simple handling, Thyro-S is also
future-orientated for new applications. The Thyro-S is suitable for a
direct supply of ohmic loads.
1.2 SPECFIC CHARACTERISTICS THYRO-S
Thyro-S has a wide range of distinguishing features, for instance
• easy handling
• type range 230-500 Volts, 16-280 A, single phase, 2-phase and
3-phase structure is possible
• ohmic load
• operating modes 1:1, as well as 1:2, 1:3 and 1:5 (e.g. for commis-
sioning)
• Digital control with 24 V signal (> 3 V) or via optional bus module
• series system interface
• electrical separation according to EN 50178 chapt. 3
• Connection for optional visualization and commissioning
13