Operating Modes - Hyundai H-ALD3-18H Instruction Manual

10

7. OPERATING MODES

COOLING MODE
The cooling function allows the air conditioner to cool the room and at the
same time to reduce the humidity in the air.
To activate the cooling function «COOL», press the «MODE» button until the
symbol appears on the display.
The cooling cycle is activated by setting the keys
lower than that of the room.
To optimize the functioning of the conditioner, adjust the temperature by
pressing the «TIMER» button, the speed by pressing the «FAN» button and the
direction of the air flow by pressing the «SWING» button.
HEATING MODE
The heating function allows the air conditioner to produce hot air.
To activate the heating function «HEAT», press the «MODE» button until the
symbol appears on the display.
With the keys
To optimize the functioning of the conditioner, adjust the temperature by
pressing the «TIMER» button, the speed by pressing the «FAN» button and the
direction of the air flow by pressing the «SWING» button.
EN
FAN MODE
To set the FAN mode, Press «MODE» untill
Whith pressing «FAN» button the speed changes in the following sequence:
LOW/ MEDIUM/HIGH /AUTO in FAN mode.
The remote control also stores the speed that was set in the previous mode
of operation. In FEEL mode (automatic) the air conditioner automatically
chooses the fan speed and the mode of operation (COOLING or HEATING).
TIMER MODE–TIMER ON
To set the automatic switching on of the air conditioner.
To program the time start,the appliance should be off.
Press «TIMER», set the temperature with pressing the key
«TIMER» again, set the time with pressing the key
more times till on the display you can read the time which passes between
the programming and the timed start.
Before proceeding with the timed start: program the working mode with
the «MODE» button and the fan speed with the «FAN» button. Switch the
conditioner off (with the «ON/OFF» button).
or set a temperature higher than that of the room.
NOTE!
The appliance is fitted with a Hot Start function, which delays
appliance to startup in a few seconds to ensure an immediate
output of hot air.
In HEATING operation, the appliance can automatically activate
a defrost cycle, which is essential to free the condenser from an
excessive deposit of frost. This procedure usually lasts for 2–10
minutes during defrosting, fans stop operation. After defrosting,
it returns to HEATING mode automatically.
Electric air conditioner (split system)
or at a temperature
appears in the display.
or
or , press the key
, press