Hyundai H-ALD3-18H Instruction Manual page 8

8
works in the forced cooling mode. The fan speed is high for 30 min. The
remote controller cannot be used.
3. Off mode. The indicator is extinguished and the air conditioner does not
work. The remote controller can be used.
Remote control
1
2
3
4
EN
5
MODE
6
7
FAN
8
SWING
9
HEALTH
Fig. 3
10. Button «TURBO». In cooling mode, press this button, the unit will give the
maximum cooling temperature. In heating mode, press this button, the
unit will give the maximum heating temperature.
11. Button «DISPLAY». To switch on/off the LED display (if present).
12. Button «TIMER». To set automatic switching on/off.
ECO TIMER
SLEEP DISPLAY
SWING
TURBO
Electric air conditioner (split system)
1. Button «TEMP UP». Increase the
temperature or time by 1 unit.
2. Button «TEMP DN». Decrease the
temperature or time by 1 unit.
3. Button «ON/OFF». To switch the
conditioner on and off.
4. Button «ECO». In cooling mode,
press this button, the tempera-
ture will increase 2 °С on the
base of setting temperature. In
heating mode, press this button,
the temperature will decrease
2 °С on the base of setting
temperature.
5. Button «MODE». To select the
12
mode of operation.
6. Button «SLEEP». To activate the
11
function «SLEEP».
7. Button «FAN». To select the fan
8
speed of auto/low/mid/high.
8. Button «SWING». To activate or
10
deactivate of the movement of
the deflectors.
9. Button «HEALTH». To switch –
on /off HEALTH funtion. It is a
button which controls the ionizer
or plasma generator only for
inverter type.