Hyundai H-ALD3-18H Instruction Manual page 9

Electric air conditioner (split system)
Remote control display
g
j
Fig. 4
а) FEEL mode indicator
b) COOLING indicator
c) DEHUMIDIFYING indicator
d) FAN ONLY OPERATION indicator
e) HEATING indicator
f) ECO indicator
g) CLOCK indicator
h) TIMER OFF indicator
i) TIMER ON indicator
The outlooking and some function of remote control may vary according to
the model.
The shape and position of buttons and indicators may vary according to the
model, but their function is the same.
The unit confirms the correct reception of each press button with a sound signal.
In order to avoid malfunction of the remote control board do not insert used
batteries or batteries of various types.
If the conditioner is not used for a long time, remove batteries from the
board or else electrolyte may leak and damage the board.
In normal operation of the conditioner average service life of batteries will be
about a half-year.
Replace batteries, if command receiving is not confirmed with an audio
signal, or if the display does not show a sign of command transfer. When
generating commands from the remote control board, point an IR-radiator at
a remote-control signal receiver situated on the indoor unit. Hold the remote
control board at the distance of no more than 8 m from the indoor unit. The
remote control board will not work, if there are any curtains, doors or other
things between it and the indoor unit. Protect the board from water and
exposure to direct sunlight and heat sources.
a b c d
k l m n
j) FAN indicator:
auto;
low/ middle/ high fan speed
k) SLEEP indicator
l) HEALTH indicator
m) FLAP SWING indicator
n) FLAP SWING indicator
o) TURBO indicator
e f
h
i
o
9
1
2
3
4
5
MODE ECO
6
7
FAN SLEEP
8
SWING
EN
9
HEALTH
S
T