Delivery Set; Device Control - Hyundai H-ALD3-18H Instruction Manual

Electric air conditioner (split system)

5. DELIVERY SET

Complete set of air conditioner (split system) includes:
Conditioner unit for indoor installation – 1 piece
Panel for indoor unit (utilities) – 1 piece
Conditioner unit for outdoor installation – 1 piece
Remote control – 1 piece
Batteries for remote control board – 2 pcs.
Operator's manual with warranty card – 1 piece
Packing of indoor-installation unit – 1 piece
Packing of indoor unit panel – 1 piece
Packing of outdoor-installation unit – 1 piece

6. DEVICE CONTROL

Description of indoor unit control board
Infrared Temperature
signal indicator
receiver
Fig. 2
The conditioner is controlled from a remote control board or from a control
panel of the indoor unit. Control and indication board of your conditioner may
visually differ from a layout view shown below. Its functions will remain the
same.
Emergency control shall be used if the remote control board is lost or
broken, or batteries are low. Using an emergency control button situated
on the indoor unit control panel you may select COOL or AUTO mode of the
conditioner work. Pressing this button, select a mode of the conditioner work:
AUTO, COOL, the conditioner is OFF, AUTO again, etc.
1. Auto mode. The operation indicator lights up and the air conditioner works
in the forced automatic mode. The remote controller can be used.
2. Forced cooling. The operation indicator blinks and the air conditioner
Operation Timing
indicator light
Warning
Defrosting/
light
preheat light
7
EN
On/Off