Intermec PF8d User Manual page 84

Appendix A — Printer Specifications
72
Tags and Strip With Black Marks
a
b
c
d
Tickets, Tags, &
Continuous Strip
Plain Continuous Stock
The PF8 printers can use continuous stock without any detection
slots or black marks. The printer must be set for continuous stock by
using the ESim Q command. For more information, see the
the PC4, PF8, PD41, and PD42 Printer Programmer's Reference Manual
The length of each copy is decided by the size of the print image and
any additional media feed is decided by the Q command. Continuous
stock cannot be used in the Auto-Sensing mode.
Tag or strip width (a)
Maximum: 116.0 mm (4.57 in)
Minimum: 25.0 mm (1.00 in)
Tag or strip width (a)
Maximum: 116.0 mm (4.57 in)
Minimum: 25.0 mm (1.00 in)
Tag length (b)
Minimum: 12.7 mm (0.50 in)
Detection slot/Black mark
width (c)
Minimum: 14.0 mm (0.55 in)
Black mark height (d)
Maximum: 10.0 mm (0.39 in)
Minimum: 3.0 mm (0.12 in)
The black mark sensor is centered
on the media path.
Maximum reflectance 5% at 940
nanometers. Carbon black.
PF8d and PF8t Desktop Printer User's Guide
ESim for
.