Table of Contents
Advertisement
TTB772STM by TITAN
Troubleshooting
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING! Only perform the steps described within these
instructions! All further inspection, maintenance and repair work must
specialist if you cannot solve the problem yourself!
Problem
1. Product does
not start
2. Product
does not
reach boiling
temperature
3. Unsatisfactory
result
4. Abnormal
escaping
steam from
safety cap
Possible cause
1.1. Not connected to power
supply
1.2. Power cord or plug is
defective
1.3. Other electrical defect to
the product
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source (e. g.
generator) has too low
voltage
2.3.
properly
3.1. Boiling temperature not
reached
3.2.
water in water tank
3.3. Steam plate is partly
blocked
3.4. Excessive water in
steam plate
3.5. Heating element
covered with lime scale
4.1. Damaged pressure
release valve
4.2. Steam release openings
and / or steam plate is
blocked
Troubleshooting
Solution
1.1. Connect to power
supply
1.2. Check by a specialist
electrician
1.3. Check by a specialist
electrician
2.1. Use a proper
extension cord
2.2. Connect to another
power source
2.3.
3.1. Let the product pre-
heat for longer time
3.2. Add water in water
tank (see "Filling with
water")
3.3. Remove the blockage
3.4. Remove excessive
water from time to time
3.5. Cleaning the heating
element (see "Lime
scale removal")
4.1. Replace with a suitable
safety cap
4.2. Remove blockage
EN
EN
23
Advertisement
Table of Contents
