Troubleshooting - Titan TTB926STM Instructions Manual

Care and maintenance / Troubleshooting
EN EN
Repair
This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it
checked and repaired.
Storage
1. Disconnect the product from the power supply to switch it off and unplug the
power cord from the product.
2. Clean the product as described above.
3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
4. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
5. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
6. Drain remaining water from the water tank (4) at the end of each working.
Transportation
1. Disconnect the product from the power supply to switch it off and unplug the
power cord (6) from the product.
2. Refit the steam plate (3) to the carry handle (2) and lock it with the lock button
(2a).
3. Always carry the product by its carry handle (2) and steam plate handle (3c).
4. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.

Troubleshooting

Suspected malfunctions are often due to causes that the user can fix themselves.
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
22
MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 22 MNL_TTB926STM_2200W Wallpaper Stripper_GB_V8_220623.indd 22
TTB926STM by TITAN
2022/6/23 下午5:04 2022/6/23 下午5:04