After Use - Titan TTB772STM Manual

TTB772STM by TITAN
> Keep working along the strip of wallpaper until it can be completely removed
from the wall.
> Repeat above steps until all wallpaper strips have been removed from the walls.
NOTE: The product is not designed for continuous use. Disconnect
it from the power supply and let it rest for 15 minutes after each hour
of running.
water level regularly during use and ensure it does not reach below
the MIN marking. Add water if necessary (See "Filling with water").

After use

> Disconnect the product from the power supply to switch it off, unplug the power
cord from the product and let it cool down.
> Check, clean and store the product as described below.
The golden rules for care
WARNING! Always disconnect the product from the power supply and
let the product cool down before performing inspection, maintenance
and cleaning work!
> Keep the product clean. Remove debris from it after each use and before
storage.
> Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
> Inspect the product before each use for worn and damaged parts. Do not
WARNING! Only perform repairs and maintenance work according to
specialist!
Operation / Care and maintenance Operation / Care and maintenance
80 minutes of use. Check the
EN EN
19