Hyundai HL960A Operator's Manual page 270

6) 6)
DISTRIBUTOR DISTRIBUTOR
7) 7)
INSTRUCTIONS FOR REPAIR IN CASE OF BLOCKAGE OF A PROGRESSIVE LUBRICA- INSTRUCTIONS FOR REPAIR IN CASE OF BLOCKAGE OF A PROGRESSIVE LUBRICA-
TION SYSTEM TION SYSTEM
(1) (1)
Reason of system blockage Reason of system blockage
A creased or clogged lubrication pipe
-
A bearing overfilled or clogged by lubricant
-
Lubricant not suitable for central lubrication system
-
Distributor outlet closed
-
Blocked distributor
-
(2) (2) Message signaling a blockade Message signaling a blockade
If the system pressure should exceed the rated service pressure, a blockage many exist in the
system and will be signaled by ① ① grease exhaustion at pressure relief valve and ② ② D0 optical
display pin doesn't move.
Grease exhaustion at pressure relief valve
Operating pressure-Inlet
maximum 300 bar
-
Modular designed distributor system for optimum
lubricant feed rates
-
Flexible extension possibilities
-
Highest precision
-
Comprehensive program of distributor types
-
Optionally with monitoring and blockade control
Optimized distributor combination through field
test at HCE durability test site
①
D0 optical display pin
8-5
Temperature range
-35 C to +80
˚
②
C
˚