Hyundai HL960A Operator's Manual page 249

(6) Remove the transmission oil filter cartridge.
Dispose of the used transmission oil filter car-
tridge properly.
(7) Clean the filter cartridge mounting base.
Remove any part of the filter cartridge gasket
that remains on the filter cartridge mounting
base.
(8) Apply a light coat of oil to the gasket of a new
transmission oil filter cartridge.
(9) Install the new transmission oil filter cartridge.
Screw the filter in until contacts with the sealing
surface is obtained and tighten it now by hand
about 1/3 to 1/2 turn.
(10) Fill the oil through filler cap and check if the oil is
at the appropriate level.
(11) The proper oil amount is 33 liters. (8.7 U.S. gal-
lons)
As the machine is hot after operation wait As the machine is hot after operation wait
until the temperature has dropped. until the temperature has dropped.
It is imperative to pay attention to absolute It is imperative to pay attention to absolute
cleanliness of oil and filter. cleanliness of oil and filter.
Binding is in any case the marking on the oil Binding is in any case the marking on the oil
level gauge. level gauge.
※
Prohibition to inject water to filler cap directly Prohibition to inject water to filler cap directly
when you wash the machine. when you wash the machine.
Zone " HOT "
6-42
7607A6MI26
73036MI14
Red
Blue
75796MI29
Level gauge