Ipv6 Address Link-Local - H3C S3100 Series Command Manual

Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
The prefix length should not be more than 64 bits when a aggregatable global unicast
address(es) or site-local address(es) in the EUI-64 format is configured.
Examples
# Configure an IPv6 address in the EUI-64 format for the VLAN-interface 1. The prefix
of the address is 2001::1/64, and the interface ID is generated based on the MAC
address of the device.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ipv6 address 2001::1/64 eui-64
# Display the generated IPv6 address in the EUI-64 format.
[Sysname-Vlan-interface1] display ipv6 interface Vlan-interface 1
Vlan-interface1 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::2E0:FCFF:FE00:3100
Global unicast address(es):
2001::2E0:FCFF:FE00:3100, subnet is 2001::/64
Joined group address(es):
FF02::1:FF00:3100
FF02::1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
# Configure VLAN-interface 1 to generate an IPv6 address in the EUI-64 format based
on the prefix 3001::/64.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ipv6 address 3001::/64 eui-64

1.1.17 ipv6 address link-local

Syntax
ipv6 address ipv6-address link-local
undo ipv6 address ipv6-address link-local
View
VLAN interface view
Chapter 1 IPv6 Configuration Commands
1-25