2.2 INSTALLING AFG VENT COVERS
Included with your QuietCool Attic Gable Fan are four vent covers
that are designed to be installed around the attic fan housing to
block any air backdrafting into the attic through a gable vent that
is larger than the attic fan cylinder, causing air to cycle in and out
around the vent.
1. Take the vent cover and match it to one of the sides around
the attic fan housing.
2. Using the two provided screws, attach each corner to the
wood framing around your gable vent. (See picture for screw
locations)
3. Repeat step 1 and 2 for the three additional covers.
6
Installation Video:
Watch the video by scanning the QR
code or visit
www.QuietCoolSystems.com/support
Figure 2.1A
Figure 2.1B
1-888-QUIETCOOL