Tesla MODEL X Owner's Manual page 90

Towing and Accessories
Parking with a Trailer
Whenever possible, avoid parking on a grade. However,
if parking on a grade is absolutely necessary, place
wheel chocks under the trailer wheels:
• One person presses and holds the brake pedal.
• A second person places the wheel chocks under the
wheels on the downgrade side of the vehicle's tires.
• When the chocks are in place, release the brake
pedal and ensure the chocks hold the weight of the
vehicle and trailer.
NOTE: When testing chocks, ensure that Vehicle
Hold (see Vehicle Hold on page
If Vehicle Hold is braking Model X, the Vehicle Hold
indicator light displays on the instrument panel. To
disengage Vehicle Hold, press and release the brake
pedal.
• Place the vehicle in Park.
WARNING: If parking on a grade is necessary,
always ensure that all trailer wheels have been
securely chocked. Failure to do so can result in
serious damage, injury, or death.
Trailer Sway Mitigation
When trailer sway is detected, the Model X electronic
stability control system attempts to apply the
appropriate amount of braking to minimize trailer sway.
The instrument panel briefly displays the traction
control system indicator. Pressing the brake pedal when
the system is actively braking to mitigate trailer sway
does not cancel this automatic braking.
Connecting the Tow Hitch
The Model X towing package includes a weight-
carrying hitch with a 2" x 2" removable hitch receiver.
When not in use, the hitch receiver should be removed
and stored in a dry location to prevent rust and
corrosion. Keep the dust cover over the hitch housing
to prevent dirt and debris from entering.
CAUTION: Always remove the ball mount before
installing or removing the hitch receiver from the
vehicle (see Attaching and Removing the Ball
Mount on page 89).
WARNING: You must use the Model X trailer hitch
when towing a trailer. Never attempt to attach a
different type of trailer hitch.
NOTE: Always attach safety chains when towing. Cross
the chains under the trailer tongue and attach to the
trailer eyelets to ensure the security of the trailer load.
NOTE: The maximum permissible rear overhang for the
coupling point is 47 inches (1186 mm).
88
NOTE: The trailer hitch assembly is attached to the
body of the vehicle with 8 nuts.
72) is not engaged.
To install the trailer hitch receiver:
1. Remove the dust cover from the hitch housing.
2. Insert the key into the locking cylinder on the hitch,
3. Pull the locking cylinder out of the adapter
and turn the cylinder so the top of the key is aligned
with the "unlocked" position.
approximately 1/8" (0.5 cm), and turn clockwise until
the red marking on the cylinder aligns with the white
dot.
MODEL X Owner's Manual